期刊文献+

压力机杆系优化求解的变量循序组合响应面法 被引量:14

Variable Sequential Combination Response Surface Methodology for Press Rod System Optimization
下载PDF
导出
摘要 为了能够切实有效地对机械压力机杆系驱动机构进行优化设计,采用响应面分析法并结合试验设计方法,提出了求解该杆系多目标优化问题的变量循序组合响应面法(VSCRSM),并建立了优化数学模型.对优化变量及其变化范围进行循序取舍组合和设定,同时采用响应面分析法多次拟合进行优化求解,最终得到了优化结果.与初始设计及变容差遗传算法相比较,VSCRSM优化目标的最小值分别降低了15.85%和5.8%,并且滑块行程误差仅为0.09%,不仅解决了初始设计及变容差遗传算法所得结果中滑块行程超出误差范围的问题,而且实现了压力机杆系的显著优化. To realize a practical and effective optimum design of rod system in double toggle mechanical press,variable sequential combination response surface methodology(VSCRSM) is proposed to solve the multiple objective optimization,then the mathematic models are established.The optimal design variables and their ranges are sequentially combined and set,and response surface methodology is repeatedly employed.The optimization results show that VSCRSM enables to decrease the minimum of the objective function by 15.85 %,compared with the initial design,and by 5.8 %,compared with the flexible tolerance genetic algorithm.VSCRSM confines the error of the slider stroke as 0.09 %,thus the problem is solved that the error is beyond limited range in the initial design and the flexible tolerance genetic algorithm.
出处 《西安交通大学学报》 EI CAS CSCD 北大核心 2012年第5期57-62,共6页 Journal of Xi'an Jiaotong University
基金 国家自然科学基金资助项目(50575175) 陕西省重大科技创新项目(2007ZKC(2)03-04)
关键词 机械压力机杆系 响应面法 多目标优化 mechanical press rod system response surface methodology multiple objective optimization
  • 引文网络
  • 相关文献

参考文献6

二级参考文献20

  • 1苏永华,赵明华,蒋德松,刘晓明.响应面方法在边坡稳定可靠度分析中的应用[J].岩石力学与工程学报,2006,25(7):1417-1424. 被引量:66
  • 2玄光男 程润伟.遗传算法与工程设计[M].北京:科学出版社,2000..
  • 3Wong F S. Slope reliability and respose surface method [ J ]. Journal of Geotechnical Engineering, 1985,111 ( 1 ) : 32-53.
  • 4Bucher C G, Bourgund U. A fast and efficient response surface approach for structural reliability problems [ J ]. Structural Safety, 1990,7:57-66.
  • 5Rajashekhar M R,Ellingwood B R. A new look at the response surface approach for reliability analysis [ J]. Structural Safety, 1993,12:205-220.
  • 6Shinozuka M,Deodatis G. Response variability of stochastic finite element systems [ J]. Journal of Engineering Mechanics,ASCE, 1988,114(3 ) :499-519.
  • 7Yamazaki F,Shinozuka M, Dasgupta G. Neumann expansion for stochastic finite element systems [ J ]. Journal of Engineering Mechanics, ASCE, 1988, 11 ( 1 ) : 1335- 1354.
  • 8Yossifon S, Shivpuri R. Analysis and comparison of selected rotary linkage drives for mechanical press [J].Int J Mach Tools Manufact, 1993, 33(2) : 175-192.
  • 9Du R, Guo W Z. The design of a new metal forming press with controllable mechanism [J]. ASME Journalof Mechanical Design, 2003, 125(9).. 582-592.
  • 10江琪.机械运动方案及机构设计[M].北京:高等教育出版社,1991.105-118.

共引文献66

同被引文献149

引证文献14

二级引证文献80

相关主题

;
使用帮助 返回顶部