期刊文献+

稻秸秆/玉米淀粉胶复合材料的制备及性能 被引量:6

Preparation and Properties of Rice Straw/Cornstarch Adhesive Composite
下载PDF
导出
摘要 以玉米淀粉为原料,H2O2为氧化剂,制得氧化玉米淀粉胶。利用模压方法制备了稻秸秆/玉米淀粉胶复合材料,基于正交试验方法,研究了原料配比对复合材料的密度、抗压强度、吸湿性及可降解性能的影响。结果表明:稻秸秆/玉米淀粉胶复合材料密度随稻秸秆含量增加,先升高后降低;当稻秸秆含量为16.3%时,复合材料密度最小;随玉米淀粉胶含量增加复合材料抗压性能降低。当稻秸秆∶改性淀粉∶玉米淀粉胶∶滑石粉∶碳酸氢氨的质量比为6∶9∶15∶5∶1时,复合材料抗压强度较高。稻秸秆/玉米淀粉胶复合材料在潮湿环境下的降解性能良好,但与聚苯乙烯泡沫塑料相比易吸潮。 Oxidized cornstarch adhesive was prepared with cornstarch as raw material and H2 02 as oxidant. Rice straw/cornstarch adhesive composite was prepared by compression molding. Effects of raw material ratio on the density, compressive strength, hygroscopicity and degradability of the composite were studied with orthogonal test. Resuits showed that the density of composite first increased and then decreased with increasing rice straw content, and density of composite with 16.3% rice straw was the least. Compressive strength of composite decreased with increasing cornstarch adhesive content. Rice straw/cornstarch adhesive composite had high compressive strength while keeping rice straw : modified starch : cornstarch adhesive : talc : NH4HCO3 as 6 : 9 : 15 : 5 : 1. Rice straw/cornstarch adhesive composite had good degradation performance in moist environment but easy absorption of moisture compared with EPS.
出处 《合成材料老化与应用》 2012年第2期1-5,共5页 Synthetic Materials Aging and Application
基金 中央高校基本科研业务费专项基金项目(KYZ200921)
关键词 玉米淀粉胶 稻秸秆复合材料 制备方法 性能研究 cornstarch adhesive, rice straw composite, preparation method, performance study
  • 相关文献

参考文献11

  • 1Hongsheng Liu, Fengwei Xie, Long Yu, et al. Thermal processing of starch-based polymers [J]. Progress in Polymer Science, 2009, 34 (12) :1348-1368.
  • 2陈希荣.全生物降解包装材料的研究与应用[N].中国包装报,2010-01-06.
  • 3田华,杨彪,许国志,林毅.淀粉基生物降解材料的制备及其力学性能的研究[J].中国塑料,2009,23(2):51-53. 被引量:7
  • 4Zhou J, Song J, Parker R. Structure and properties of starch-based foams prepared by microwave heating from extruded pellets [J]. Carbohydrate Polymers,2006,63 (4) :466-475.
  • 5Cinelli P, Chiellini E, Lawton J W, et al. Foamed articles based on potato starch, corn fibers and poly (vinyl alcohol) [J]. Polymer Degradation and Stability ,2006,91 ( 5 ) : 1147-1155.
  • 6Shey J, Imam S H, Glenn G M, et al. Properties of baked starch foam with natural rubber la- tex [J]. Industrial Crops and Products, 2006,24 (1) :34-40.
  • 7Glenn G M, Orts W J, Nobes G A R. Starch, fiber and CaCO3 effects on the physical properties of foams made by a baking process [J]. Industrial Crops and Products, 2001,14 ( 3 ) : 201-212.
  • 8Lawton J W, Shogren R L, Tiefenbacher K F. Aspen fiber addition improves the mechanical properties of baked cornstarch foams [J]. Industrial Crops and Products,2004,19:41-48.
  • 9Shogren R L, Lawton J W, Tiefenbacher K F. Baked starch foams: starch modifications and additives improve process parameters, structure and properties [J]. Industrial Crops and Prod- ucts ,2002,16(1) :69-79.
  • 10Shibata S, Cao Y, Fukumoto I. Press forming of short natural fiber-reinforced biodegradable resin : effect of fiber volume and length on flex- ural properties [J]. Polymer Testing, 2005,24 (8) :1005-1011.

二级参考文献12

共引文献6

同被引文献140

引证文献6

二级引证文献62

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部