期刊文献+

Q-I-Q-T工艺对60Si2CrVA钢断裂韧性的影响 被引量:2

Effects of Q-I-Q-T heat treatment technique on the fracture toughness of 60Si2CrVA steel
下载PDF
导出
摘要 研究60Si2CrVA弹簧钢经淬火-等温-淬火-回火(Q-I-Q-T)热处理后复相组织含量与断裂韧性间的关系。结果表明,在实验的等温温度范围内,随着等温温度的升高,残余奥氏体和贝氏体含量逐渐增大,60Si2CrVA钢强度降低,断裂韧性逐渐增加,在300℃等温时,断裂韧性达到最大值66.37 MPa.m1/2。稳定的残留奥氏体与过渡形态贝氏体量增加是提高断裂韧性的主要原因。 The relationship between duplex structure and fracture toughness of 60Si2CrVA spring steel after quenching-isothermal-quenching-tempering process was studied.The results show that,in the experimental temperature range,with the increase of isothermal temperature,the content of retained austenite and bainite increases gradually,the strength decreases of 60Si2CrVA steel,and fracture toughness increases gradually.At the temperature of 300 ℃,fracture toughness reaches a maximum value of 66.37 MPa·m1/2.The increase of stable retained austenite and transitional form bainite is the main reason for the improvement of fracture toughness.
出处 《兵器材料科学与工程》 CSCD 北大核心 2012年第3期9-11,共3页 Ordnance Material Science and Engineering
基金 国家科技支撑计划项目(2007BAE11B03)
关键词 60SI2CRVA 淬火 回火 马氏体 贝氏体 残留奥氏体 60Si2CrVA quenching tempering martensite bainite retained austenite
  • 相关文献

参考文献5

二级参考文献27

共引文献27

同被引文献16

  • 1方芳,李红,王萍.Cr4Mo4V高温轴承钢的磨削试验[J].轴承,2005(6):24-25. 被引量:2
  • 2江海涛,唐荻,米振莉.汽车用先进高强度钢的开发及应用进展[J].钢铁研究学报,2007,19(8):1-6. 被引量:106
  • 3Ke Zhang,Meihan Zhang,Zhenghong Guo,Nailu Chen,Yonghua Rong.A new effect of retained austenite on ductility enhancement in high-strength quenching–partitioning–tempering martensitic steel[J].Materials Science & Engineering A.2011(29)
  • 4Matlock David K.,Br?utigam Volker E.,Speer John G.Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel[J].Materials Science Forum.2003(426)
  • 5John G. Speer,David V. Edmonds,Fernando C. Rizzo,David K. Matlock.Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation[J].Current Opinion in Solid State & Materials Science.2004(3)
  • 6S.S. Nayak,R. Anumolu,R.D.K. Misra,K.H. Kim,D.L. Lee.Microstructure–hardness relationship in quenched and partitioned medium-carbon and high-carbon steels containing silicon[J].Materials Science & Engineering A.2008(1)
  • 7Hsu T.Y.,Xu Zu Yao.Design of Structure, Composition and Heat Treatment Process for High Strength Steel[J].Materials Science Forum.2007(561)
  • 8Rizzo F.C.,Martins A.R.,Speer John G.,Matlock David K.,Clarke A.,De Cooman Bruno C.Quenching and Partitioning of Ni-Added High Strength Steels[J].Materials Science Forum.2007(539)
  • 9赵才,江海涛,唐荻,赵松山,李辉.低碳硅-锰系Q&P钢的热处理工艺及实验室研究[J].金属热处理,2008,33(2):56-59. 被引量:13
  • 10王金玲,张书丽.Cr4Mo4V钢制轴承零件的真空热处理工艺[J].轴承,2008(4):16-17. 被引量:9

引证文献2

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部