期刊文献+

超声处理对AZ80镁合金组织与性能的影响 被引量:6

Effect of Ultrasonic Treatment on Microstructure and Mechanical Properties of AZ80 Magnesium Alloy
下载PDF
导出
摘要 通过OM、SEM及阿基米德法等手段,研究超声处理对AZ80镁合金凝固组织、密度和力学性能的影响。结果表明:610℃超声处理可以降低晶粒尺寸,减少枝晶数量。经过超声处理后,合金密度由1.770g/cm3升至1.805g/cm3,抗拉强度由138MPa升高到170.5MPa,延伸率由2.5%提高为4.0%。 The effects of the ultrasonic treatment on microstructures,density and mechanical properties of AZ80 magnesium alloys were investigated with OM,SEM and Archimedes principle.The results show that after the ultrasonic treatment at 610 ℃,the grain size and numbers of dendrites are reduced,the density of alloy increases from 1.770 g/cm3 to 1.805 g/cm3,the tensile strength increases from 138 MPa to 170.5 MPa and the elongation increases from 2.5% to 4.0%.
出处 《有色金属(冶炼部分)》 CAS 北大核心 2012年第3期43-46,共4页 Nonferrous Metals(Extractive Metallurgy)
基金 "十二五"国家科技支撑计划项目(2011BAE22B01)
关键词 AZ80镁合金 超声波 空化作用 组织与性能 AZ80 magnesium alloy ultrasonic cavitation microstructure and mechanical property
  • 相关文献

参考文献5

  • 1Czerwinski F.Magnesium Injection Molding[M].NewYork:Springer,2008:1.
  • 2Friedrich H E,Mordike B L.Magnesium Technology:Metallurgy,Design Data,Applications[M].Berlin:Springer-Verlag,2006:145.
  • 3Eskin G I.Broad prospects for commercial application ofthe ultrasonic(cavitation)melt treatment of light alloys[J].Ultrasonics Sonochemistry,2001,8(3):319-325.
  • 4Abramov V O,Straumala B B.Hypereutectic Al-Sibased alloys with a thixotropic microstructure producedby ultrasonic treatment[J].Materials&Design,1997,18(4):323-326.
  • 5韩延峰,李克,王俊,孙宝德.高能超声对Al-5Ti-1B中间合金组织和细化行为的影响[J].航空材料学报,2005,25(5):8-14. 被引量:4

二级参考文献15

  • 1马立群,陈锋,舒光冀.超声在制备SiC/Al-Mg颗粒增强复合材料中的应用[J].东南大学学报(自然科学版),1995,25(2):50-54. 被引量:9
  • 2刘相法,边秀房,李辉,马家骥.AlTiB中间合金细化效果的组织遗传效应[J].金属学报,1996,32(2):149-153. 被引量:52
  • 3MONHANTY P S,GRUZLESKI J E.Mechanism of grain refinement in aluminium [J] .Acta Metal Mater,1995,43(5):2001-2012.
  • 4MONHANTY P S,GRUZLESKI J E.Grain refinement mechanisms of hypoeutectic Al-Si alloys [J].Acta Metal Mater,1996,44(9):3749-3760.
  • 5MURTY B S,KORI S A,CHAKRABORTY M.Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying[J].International Materials Reviews,2002,47(1):3-29.
  • 6SPITHARAN T,LI H.Influence of Titanium to Boron ratio on the ability to grain refine aluminium-silicon alloys [J].Journal of Materials Processing Technology,1997,63:585-589.
  • 7QUESTED T E,GREER A L,COOPER P S.The variable potency of TiB2 nucleant particles in the grain refinement of aluminium by Al-Ti-B additions[J].Materials Science Forum,2002,396 ~ 402:53-58.
  • 8ESKIN G I,PIMENOV Y P,MAKAROV G S.Effect of cavitation melt treatment on the structure refinement and property improvement in cast and deformed hypereutectic Al-Si alloys [J].Materials Science Forum,1997,242:65-70.
  • 9PUSKAR A.The use of high-intensity ultrasonic [M].Elsevier:Amsterdam,1982.
  • 10LIU X F,BIAN X F,QI X G,et al.Structure heredity between Al5Ti1B and AlTi,AlB master alloys[J].Trans Nonferrous Met Soc China,1999,9(4):806-809.

共引文献3

同被引文献48

引证文献6

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部