期刊文献+

基于Pro/E的汽车发动机曲轴飞轮组的三维参数化设计与研究 被引量:3

Research and parametric design of automotive engine crankshaft flywheel based on the Pro/E
下载PDF
导出
摘要 提出了基于Pro/E软件的曲轴系列化的设计理念。通过对曲轴产品结构的特征划分,建立了相应的特征数据库。分析了目前机械产品三维参数化设计的不足,利用VC++6.0作为系统开发工具,借助Pro/E软件自带的高级开发工具包Pro/TOOLKIT,开发了基于Pro/E的汽车发动机曲轴飞轮组的三维参数化设计系统,实现了汽车曲轴飞轮组的参数化设计。通过项目的开发避免了大部分工程图的重复设计工作,提高了设计效率和设计精度。实现了三维设计进程的加速,缩短了产品的设计周期,具有重要的实际应用价值。 The design concept of the crankshaft seriation was put forward based on the Pro/E.Firstly through segmenting the structure feature of crankshaft products the relative feature database was established.Then the shortcomings of current three-dimensional parametric design of mechanical products was analyzed using VC++6.0 as a development tool,With Pro/E software advanced development toolkit that comes with Pro/TOOLKIT three-dimensional parametric design system of automotive engine crankshaft flywheel was developed based on Pro/E to achieve design parameterization of the car crankshaft flywheels.Through project development duplication of most of the design drawings was avoided,which improves the design efficiency and accuracy,speeds up three-dimensional design process,and shortens the design cycle as well with important application value.
作者 胡昊
出处 《机械设计与制造》 北大核心 2012年第5期113-115,共3页 Machinery Design & Manufacture
关键词 参数化 PRO/E 曲轴 VC++6.0 PRO/TOOLKIT 飞轮组 Parameterization Pro/E Crankshaft VC++6.0 Pro/TOOLKIT Flywheel group
  • 相关文献

参考文献7

二级参考文献11

  • 1吴伟伟,唐任仲,侯亮,王正肖.基于参数化的机械产品尺寸变型设计研究与实现[J].中国机械工程,2005,16(3):218-222. 被引量:78
  • 2方水良,沈振华.复杂变型产品参数传递结构研究[J].计算机集成制造系统,2006,12(12):1934-1938. 被引量:16
  • 3刘志更,侯志利,杨金刚,王宗彦,叶佩馨.基于KBE的桥式起重机桥架参数化设计技术[J].起重运输机械,2007(1):31-33. 被引量:24
  • 4左正兴,1992年
  • 5吴兆汉,内燃机设计,1990年
  • 6童秉枢.机械CAD技术基础[M].北京:清华大学出版社,2005.
  • 7Wu S H, et al.Semi-automated parametric design of gating systems for die-casting die[ J]. Computers & Industrial Engineering, 2007, (53) :222 - 232
  • 8Shih - Wen Hslao, Liu E A. A structural component-based approach for designing product family[J]. Computers in Industry, 2005,56:13 -28
  • 9Jiang Z H, Yah J Q. Research and development on constraint- based product family design and assembly simulation[J].Journal of Material Processing Technology, 2003, ( 139 ) : 257 - 262
  • 10Zha X F, Sriram R D. Platform-based product design and development: a knowledge-intensive support approach [ J]. Knowledge-Based Systems, 2006,19(7) : 524 -543

共引文献66

同被引文献18

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部