摘要
氟-18监测仪研制过程中,确定18F传输效率是一个关键问题。由于实验地点原因,当前仅限于用理论方法求解。通过对热工水力特征以及55/19型号蒸汽发生器结构的分析,研究了蒸汽发生器的传热管泄漏后一回路的18F核素进入取样通道的输运特性,分别选用5种微尘粒径为运算工况,运用FLUENT软件的模拟,进一步得到18F微尘在取样通道中的传输效率。
In research of 18F monitoring system, the determination of ~SF transit efficiency is a key problem. Due to the reason of experiment location which is currently limited to using theory calculation. The article study the transport properties of the 18F from the primary circuit to the sampling eharmel after 55/19 steam generator tube leaking by analysis of the thermo - hydraulic characteristics and the structure of the steam generator, and select five particle size of dust as the operation conditions, then this will further get transmission efficiency by FLUENT simulation.
出处
《核电子学与探测技术》
CAS
CSCD
北大核心
2012年第3期316-320,351,共6页
Nuclear Electronics & Detection Technology
基金
湖南省科学技术厅资助项目(2010TT2002)
关键词
18F微尘
输运特性
数值模拟
传输效率
18F dust, transport properties, simulation, transit efficiency