期刊文献+

Study of modeling unsteady blade row interaction in a transonic compressor stage part 1:code development and deterministic correlation analysis 被引量:5

Study of modeling unsteady blade row interaction in a transonic compressor stage part 1:code development and deterministic correlation analysis
下载PDF
导出
摘要 The average-passage equation system (APES) provides a rigorous mathematical framework for account- ing for the unsteady blade row interaction through multi- stage compressors in steady state environment by introduc- ing deterministic correlations (DC) that need to be modeled to close the equation system. The primary purpose of this study is to provide insight into the DC characteristics and the influence of DC on the time-averaged flow field of the APES. In Part 1 of this two-part paper, firstly a 3D viscous unsteady and time-averaging flow CFD solver is developed to investi- gate the APES technique. Then steady and unsteady simu- lations are conducted in a transonic compressor stage. The results from both simulations are compared to highlight the significance of the unsteady interactions. Furthermore, the distribution characteristics of DC are studied and the DC at the rotor/stator interface are compared with their spatial cor- relations (SC). Lastly, steady and time-averaging (employing APES with DC) simulations for the downstream stator alone are conducted employing DC derived from the unsteady re- suits. The results from steady and time-averaging simula- tions are compared with the time-averaged unsteady results. The comparisons demonstrate that the simulation employing APES with DC can reproduce the time-averaged field and the 3D viscous time-averaging flow solver is validated. The average-passage equation system (APES) provides a rigorous mathematical framework for account- ing for the unsteady blade row interaction through multi- stage compressors in steady state environment by introduc- ing deterministic correlations (DC) that need to be modeled to close the equation system. The primary purpose of this study is to provide insight into the DC characteristics and the influence of DC on the time-averaged flow field of the APES. In Part 1 of this two-part paper, firstly a 3D viscous unsteady and time-averaging flow CFD solver is developed to investi- gate the APES technique. Then steady and unsteady simu- lations are conducted in a transonic compressor stage. The results from both simulations are compared to highlight the significance of the unsteady interactions. Furthermore, the distribution characteristics of DC are studied and the DC at the rotor/stator interface are compared with their spatial cor- relations (SC). Lastly, steady and time-averaging (employing APES with DC) simulations for the downstream stator alone are conducted employing DC derived from the unsteady re- suits. The results from steady and time-averaging simula- tions are compared with the time-averaged unsteady results. The comparisons demonstrate that the simulation employing APES with DC can reproduce the time-averaged field and the 3D viscous time-averaging flow solver is validated.
机构地区 Group
出处 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2012年第2期281-290,共10页 力学学报(英文版)
基金 supported by the National Natural Science Foundation of China (51006006,51136003,50976010,50976009) the National Basic Research Program of China (2012CB720205) the Aeronautical Science Foundation of China (2010ZB51) the 111 Project (B08009) the National Science Special Foundation for Post-doctoral Scientists of China (201104049)
关键词 UNSTEADY Blade row interaction Compressor.Deterministic correlation. Average-passage equation system~ CFD Unsteady Blade row interaction Compressor.Deterministic correlation. Average-passage equation system~ CFD
  • 相关文献

参考文献28

  • 1Adamczyk J. J.: Model equations for simulating flows in multistage turbomachinery. ASME Paper 85-GT-26 (1985).
  • 2Adamczyk J. J., Mulac R. A., Celestina M. L.: A model for closing the invisid form of the average passage equation system. Journal of Turbomachinery 108, 180-186 (1986).
  • 3Rhie C. M., Gleixner A. J., Spear D. A., et al.: Development and application of a multistage NavierStokes solver: part I--Multistage modeling using bodyforces and deterministic stresses. Journal of Turbomachinery 120, 205-214 (1998).
  • 4LeJambre, C. R., Zacharias, R. M., Biederman, B. P., et al.: Development and application of a multistage Navier-Stokes solver: part II--Application to a high pressure compressor design. Journal of Turbomachinery 120, 215-223 (1998).
  • 5Li Y. G., Tourlidakis A.: Influence of deterministic stresses on flow prediction of a low-speed axial flow compressor rear stage. IMechA 215, 571-583 (2001).
  • 6Sondak D. L., Dorney D. J., Davis R. L.: Modeling turbomachinery unsteadiness with lumped deterministic stresses. AIAA Paper 96-2570 (1996).
  • 7He L.: Modeling issues for computation of unsteady turbomachinery flows. Unsteady Flows in Turbomachines, von Karman Inst. Lecture Series 1996-05, von Karman Inst. for Fluid Dynamics, Rhode Saint Genese, Belgium (1996).
  • 8Hall E. J.: Aerodynamic modeling of multistage compressor flow fields--Part II: Modeling deterministic stresses. ASME Paper 97-GT-345 (1997).
  • 9Ji L. C.: Exploration on rotor/stator interaction unsteady flow in axial turbomachinery: [Ph. D. Thesis]. Beijing University of Aeronautics and Astronautics (1998) (in Chinese).
  • 10Adkins, G. G. Jr, Smith, L. H. Jr.: Spanwise mixing in axial-flow turbomachines. ASME J. Eng. Power. 104, 97-110 (1982).

同被引文献18

引证文献5

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部