期刊文献+

工艺参数对CO_2聚合物发泡宏观形态的影响

Influence of Process Parameters on Macro Modilities of the CO_2 Polymer Foam
下载PDF
导出
摘要 研究了超临界条件下CO2在PS中的发泡形态、溶解度与压力、温度和作用时间的关系.同时考虑发泡形态和溶解度的关系,对确定工艺参数具有积极意义. The relation of modility and solubility of CO2 in PS with pressure,temperature and action time are studied. It is important for getting accurate process parameters.
出处 《广东技术师范学院学报》 2012年第3期39-41,共3页 Journal of Guangdong Polytechnic Normal University
关键词 压力 温度 作用时间 发泡形态 pressure temperature action time modility of foam
  • 相关文献

参考文献5

二级参考文献15

  • 1MASAYUKI YAMAGUCHI. Quantitative Relation Between Shear History and Rheological [J]. Advance in Polymer Technology,2001, Vol.20,No.4.
  • 2HANI E. NAGUIB. Strategies for Achieving Ultra Low - Density polypropylene foams [J]. Polymer Eng. Sci, 2002, Vol. 42, No.7.
  • 3CHONG HOON LEE ,KI-JUN LEE. Growth of Gas Bubbles in the Foam Extrusion Process [J]. Polymer Eng. Sci, 2000, Vol.19,No.2.
  • 4章梓雄,董曾南.粘性流体力学[M].北京:清华大学出版社.2003.
  • 5C.0.本尼特,J.E迈尔斯.动量、热量和质量传递[M].北京:化学工业出版社.1998.
  • 6SYANG-PENG RWEI. Distribution Mixing in a Single- Screw Extruder---Evaluation in The Flow Direction [J]. Polymer Eng Sci, 2001, Vol.4 l,No. 1.
  • 7Srinivas Siripurapu, Yvon J. Gay, et al. Generation of Microcellular Foams of PVDF and Its Blends Using Supercritical Carbon Dioxde in a Continuous Process [J]. Polymer, 2002,43:5 511-5 520.
  • 8Y.T. Shieh, J. H. SU, G. Manivannan, et al. Interaction of Supercritical Carbon Dioxide with Polymers [J]. Journal of Applied Polymer Science, 1996,59 : 695 --705.
  • 9Hao Zhou, Jian Fang, Jichu Yang, Xuming Xie. Effect of the Supercritical CO2 on PMMA/PS Blend Thin Films[J].J. of Supercritical Fluids, 2003, 26 : 137-- 145.
  • 10L. N. Nikitin, M. O. Gallyamov, et al. Swelling and Impregnation of Polystyrene Using Supercritical Carbon Dioxide[ J ]. J. of Supercritical Fluids, 2003,26 : 263-- 273.

共引文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部