摘要
本文介绍了智能材料与结构的概念、设计原理及其在振动控制中的实际应用 ,并讨论了几种典型的智能材料的优缺点。
出处
《噪声与振动控制》
CSCD
2000年第2期28-29,14,共3页
Noise and Vibration Control
参考文献7
-
1张丽娜,赵衍华,张田仓,何胜春,袁德海.2219铝合金与不锈钢惯性摩擦焊接接头组织与力学性能[J].电焊机,2017,47(11):100-105. 被引量:8
-
2冯健,韩靖,张雪梅,戴光泽,韩月娇.7A04铝合金/304不锈钢连续驱动摩擦焊及焊后热处理[J].焊接学报,2018,39(8):11-17. 被引量:14
-
3王希靖,商献伟,芝丽丽,张昌青.大截面铸铝-铸钢摩擦焊接接头显微分析[J].焊接学报,2010,31(2):29-32. 被引量:10
-
4何欢,陈哲,林三宝,范成磊,杨春利.铝-钢异种材料连接技术研究进展——固相焊[J].焊接,2013(9):18-22. 被引量:3
-
5吴铭方,司乃潮,王敬,王凤江.铁/铝扩散偶界面反应层生长机理分析[J].焊接学报,2011,32(5):29-32. 被引量:25
-
6张鹏飞,张昌青,董丽娜.铝与钢的摩擦焊接接头分析[J].焊管,2012,35(6):13-15. 被引量:4
-
7黄永宪,黄体方,万龙,刘鑫.铝/钢异种材料搅拌摩擦焊研究进展[J].精密成形工程,2018,10(1):23-30. 被引量:25
二级参考文献73
-
1张丽娜,刘敏,蒋继英,迟宏波,唐林峰,于海静.铝及铝合金与钢的连接技术研究现状[J].航天制造技术,2013(2):5-9. 被引量:17
-
2雷振,秦国梁,林尚扬,王旭友,王威.铝/钢异种金属Nd:YAG激光-MIG复合热源熔-钎焊接工艺[J].焊接,2006(6):35-37. 被引量:25
-
3邢丽,柯黎明,黄春平.铝合金与钢的搅拌摩擦焊焊缝成形及接头性能[J].焊接学报,2007,28(1):29-32. 被引量:43
-
4宁斐章.铝铜低温摩擦焊[J].金属学报,1978,14(2):180-187.
-
5潘青旭.异种钢及异种金属焊接-显微结构特征及其转变机理[M].北京:人民交通出版社,2000..
-
6段立宇 杜随更 时渭清 等.摩擦焊接的现状和展望.西北工业大学学报,1993,12:1-5.
-
7杨雄.LY12铝合金摩擦焊缝化合物相形成机制研究[D].西安:西北工业大学.1988.
-
8杜随更.LY12与亿摩擦焊接头中次生摩擦面形成机制的研究.西北工业大学学报,1993,11:63-67.
-
9Wang J H, Horny E F, Lin S J, et al. Interface study for stainless steel fiber-reinforced aluminum matrix composite [ J ]. Journal of Materials Science, 1997, 32(3) : 719 -725.
-
10Rollin M, Luster J W, Aradeniz G K, et al. Strength and struc- ture of furnace brazed joint between aluminum and stainless steel [J]. Welding Journal, 1999, 78(5) : 151s - 155s.
共引文献69
-
1戴安伦,陈惠,朱志愿,牛文明,朱凯,张豪,蒋云泽,张杰,姜靖,孙开源.喷射成形7055铝合金摩擦焊焊接接头结构与性能[J].材料科学与工程学报,2014,32(2):242-247. 被引量:3
-
2杨金龙,薛松柏,薛鹏,戴玮,吕兆萍,张满.铝/钢异种金属火焰钎焊接头组织和性能[J].焊接学报,2015,36(1):63-66. 被引量:10
-
3李辉凤,李建萍,鲁贞华,倪世风.铝-钢异种金属搅拌摩擦焊研究[J].现代焊接,2011(10):12-16. 被引量:10
-
4马晓龙.络合萃取技术在环境工程中的应用[J].江苏化工,2000,28(2):34-35. 被引量:2
-
5陈兴禄,黄建超.电解铝阳极导杆钢——铝摩擦焊接性能与经济性的研究[J].华东科技(学术版),2013(6):399-399.
-
6张体明,赵卫民,李景达,刘东明,王兴强.电弧喷涂铝涂层热扩散锌封孔技术[J].中国表面工程,2013,26(3):75-80. 被引量:1
-
7尹丹青,邱然锋,王楠楠,石红信,张柯柯.铝合金与钢的异种材料离焦激光焊研究现状[J].电焊机,2013,43(8):36-39. 被引量:1
-
8王楠楠,邱然锋,崔立虎,侯龙龙,张柯柯.铝合金/钢熔钎焊的研究现状[J].轻合金加工技术,2014,42(1):13-17. 被引量:6
-
9黄健康,何翠翠,石玗,樊丁.铝/钢异种金属焊接接头界面Al-Fe金属间化合物生成及其热力学分析[J].吉林大学学报(工学版),2014,44(4):1037-1041. 被引量:23
-
10陈鑫,李龙,周德敬.铝(4A60)-钢(08Al)复合带材界面化合物形成及结合性能[J].中国有色金属学报,2015,25(5):1176-1184. 被引量:9
同被引文献85
-
1黄文虎,王心清,张景绘,郑钢铁.航天柔性结构振动控制的若干新进展[J].力学进展,1997,27(1):5-18. 被引量:140
-
2Kim J, Ryu Y H, Choi S B. New shunting parameter tuning method for piezoelectric damping based on measured electrical impedance [J]. Smart Mater Struct, 2000, 9: 868--77.
-
3Madden J. Artificial muscle technology: physical principles and naval prospects [J]. IEEE J Oceanic Eng, 2004, 29: 706--28.
-
4Madden J, Cush R, Kanigan T, et al. Fast-contracting conducting polymer-based actuators [J]. Synth Met, 2000, 113:185- 92.
-
5Cheng Z Y, Bharti V, Xu T B, et al. Electrostrictive poly(vinylidene fluoride-trifluoroethylene) copolymers [J]. Sens Actuat A, 2001, 90:138-- 147.
-
6Shahinpoor M, Kim K J. A novel physically-loaded and interlocked electrode developed for ionic polymer-metal composites (IPMCs) [J]. Sens Actuat A, 2002, 96: 125--132.
-
7Kim J, Seo Y B. Electro-active paper actuators [J]. Smart Mater Struct, 2002, 11: 355--60.
-
8Kim J, Song C S, Yun S R. Cellulose based electro-active papers: performance and environmental effects [J]. Smart Mater Struct, 2006, 15: 719--23.
-
9Nisbiyama Y, Sugiyama J, Chanzy H, et al. Crystal structure and hydrogen bonding system in cellulose Ⅰ from synchrotron X-ray and neutron fiber diffraction [J]. J Am Chem Soc, 2003, 125: 14300-14306.
-
10Kepler R G, Anderson R A. Piezoelectricity and pyroelectricity in polyvinylidene fluorid [J]. J Appl Phys, 1978, 49: 4490--4494.
引证文献5
-
1权渭锋,毛剑琴,李超,李帆.智能结构与智能控制在振动主动控制中的应用[J].信息与电子工程,2004,2(3):232-237. 被引量:3
-
2赵立杰,付强.纤维素基电致驱动纸智能特性的研究[J].电子元件与材料,2008,27(11):70-73. 被引量:1
-
3丁炜,蒋维钢,王强.电流变流体隔振器及其隔振性能研究[J].噪声与振动控制,2001,21(4):27-30. 被引量:1
-
4韩西,钟厉,王志坚.连续梁桥竖向振动半主动滑动模式控制研究[J].重庆建筑大学学报,2003,25(2):43-47. 被引量:1
-
5张景绘,李新民.主、被动振动控制一体化理论及技术(Ⅰ)——导论[J].强度与环境,2004,31(1):50-63. 被引量:7
二级引证文献13
-
1张景绘,李新民.主、被动振动控制一体化理论及技术(Ⅲ)——杂交阻尼[J].强度与环境,2004,31(3):51-64. 被引量:2
-
2张景绘,李新民.主、被动振动控制一体化理论及技术(IV)——主动结构和智能结构[J].强度与环境,2004,31(4):46-61. 被引量:3
-
3刘立平,李英民,韩军,吕辉.调液阻尼器减振效应研究的综述和展望[J].重庆建筑大学学报,2006,28(4):132-137. 被引量:12
-
4寇发荣,方宗德.汽车可控悬架系统的研究进展[J].汽车工程,2007,29(5):426-432. 被引量:33
-
5朱海霞.基于压电元件的振动主动控制系统[J].重庆工学院学报(自然科学版),2009,23(2):131-135. 被引量:2
-
6魏明生,游春霞,夏静.压电智能材料在振动控制中的应用[J].国防技术基础,2009(4):54-56. 被引量:3
-
7刘营.系统振动控制的研究现状和发展趋势[J].中国科技博览,2011(17):63-64.
-
8董海波,武文华.机载光电设备隔振装置设计开发与性能分析[J].大连交通大学学报,2012,33(1):24-27. 被引量:7
-
9赵立杰,陈欢,荣刚.电致驱动纸机电特性及其潜在应用[J].高分子通报,2013(5):47-53.
-
10杨庆超,杨理华,朱石坚,楼京俊.柔性神经网络滑模主动控制技术[J].国防科技大学学报,2016,38(4):125-131. 被引量:1
-
1马大猷.噪声控制新进展[J].噪声与振动控制,1994,14(1):2-7. 被引量:10
-
2严济宽.关于振动控制的一些基本概念[J].噪声与振动控制,1990,10(1):8-14. 被引量:1
-
3姚康德,许美萱.智能材料研究进展[J].材料导报,1994,8(2):7-10. 被引量:6
-
4姚康德,许美萱.智能材料[J].材料导报,1993,7(5):1-4. 被引量:4
-
5万生.神奇的智能材料[J].科学中国人,1997(8):53-54.
-
6王云英.智能材料发展概况(一)[J].铁道机车车辆工人,1995(8):22-23.
-
7王云英.智能材料发展概况(二)[J].铁道机车车辆工人,1995(9):21-23.
-
8李杨.浅谈初中数学教学中学生创新思维的培养[J].都市家教(下半月),2013(5):4-4.
-
9许莉.也谈语文教学中学生创造性思维的培养[J].成才之路,2009(21):18-18.
-
10谭丽.在语文教学中培养学生的创新思维[J].四川教育,2016,0(02X):40-41.