期刊文献+

半固态重熔加热工艺对镁合金组织与耐蚀性能的影响 被引量:2

Effects of Semi-Solid Remelting Heat Treatment on Microstructure and Corrosion Resistance of As-Cast AZ91 Magnesium Alloys
下载PDF
导出
摘要 详细研究了半固态重熔加热工艺参数对AZ91D镁合金半固态组织演变及其耐蚀性的影响。结果表明:AZ91D镁合金在液固双相区进行重熔处理时,合金中低熔点共晶组织首先发生熔化并隔离α-Mg树枝晶,其后被隔离的粗大α-Mg树枝晶逐步演化成为类球晶甚至发生合并长大现象。不同半固态重熔加热工艺参数对组织演化过程影响明显。 The effects of semi-solid remelting heat treatment on the microstructure and corrosion resistance of AZ9lD magnesium alloys were detailedly carried out.The results show that the low-melting eutectic phase primarily melted and separated the α-Mg dendrites when AZ91D magnesium alloy was isothermally-treated at the semi-solid temperature;then the large separate α-Mg dendrites evolved into the spherical grains and even merging growth occurred.The effects of remelting technological parameters on evolution process were obvious.
作者 万迪庆
出处 《铸造》 CAS CSCD 北大核心 2012年第6期666-668,共3页 Foundry
基金 江西省自然科学基金项目(20114BAB216015) 江西省教育厅科技项目资助(GJJ12320)
关键词 AZ91D镁合金 半固态重熔加热处理 金相组织 耐蚀性 AZ91D magnesium alloy semi-solid remelting heat treatment microstructure corrosion resistance
  • 相关文献

参考文献7

  • 1Avedisian M M, Baker H. ASM specialty handbook: Magnesium and Magnesium alloys [M]. Materials Park, OH: ASM, 1999.
  • 2Flemings M C. Behavior of metal alloys in the semi-solid state [J]. MetallTrans., 1991, 22B (6): 269-293.
  • 3李元东,郝远,闫峰云,方铭.AZ91D镁合金在半固态等温热处理中的组织演变[J].中国有色金属学报,2001,11(4):571-575. 被引量:82
  • 4张小立,李廷举,滕海涛,谢水生,金俊泽.等温热处理过程中铸态AZ91镁合金的微观组织演化[J].铸造,2007,56(10):1048-1052. 被引量:19
  • 5Wang J L, Su Y H, Tsao C Y A. Structural evolution of conventional cast dendritic and spray-cast non-dendritic structures during isothermal holding in the semi-solid state [J]. Seripta Materialia, 1997, 37 (12): 2003-2007.
  • 6宋光铃.镁合金猫蚀与防护[M].北京:化学工业出版社,2006.
  • 7Song Guangling, Atrens Andrej, Wu Xianliang, et al. Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride [J]. Corrosion Science, 1998, 40 (10) : 1769-1791.

二级参考文献36

  • 1朱鸣芳,苏华钦.半固态等温处理制备粒状组织ZA12合金的研究[J].铸造,1996,45(4):1-5. 被引量:47
  • 2张奎,Trans Nonferr Met Soc China,1999年,9卷,3期,553页
  • 3谢水生,半固态态金属加工技术及其应用,1999年,1页
  • 4AGHION E, BROFIN B, ELIEZR D.The role of the magnesium industry in protecting the environment [J]. Journal of Materials Processing Technology, 2001,117: 381-385.
  • 5FRIEDRICH H, SCHUMANN S. Research for a “new age of magnesium”in the automotive industry [J]. Joumal of Materials Processing Technology, 2001,117: 276-281.
  • 6MORDIKE B L, EBERT T. Magnesium properties applications potential [J]. Mater. Sci.and Eng, A302(2001):37-45.
  • 7NAHED A, E1-Mahallawy, MOHAMED A, et al. On the influence of process variables on the thermal conditions and properties of high pressure die-cast magnesium alloys [J]. Journal of Materials Processing Technology, 1998,73:125-138.
  • 8MAHMOUD Schehata,ELHACHMI Essadiqi,CHEE-Ang Loong,Semisolid forming of A1 and Mg alloys for transportation applications [J]. Natural Resources Canada, 2004.
  • 9CHRIS S Rice,PATRICIO F. Mendez.Slurry-based semisolid die casting [J]. Advanced Materials & Process,2001,49-52.
  • 10KLEINER S, BEFFORT O, WAHLEN A. Microstructure and mechanical properties of squeeze cast and semi-solid cast Mg-Al alloys [J]. Journal of Light Metals, 2002,2:277-280.

共引文献97

同被引文献13

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部