摘要
核电厂事件导向法(EOP)事故处理规程以预先研究核事故的发展过程为基础,随着运行事件/事故的不断反馈及人们对核安全认知的加深,各种之前没有考虑到的事件/事故被逐步引入到EOP体系。根据运行经验反馈和核安全审评的要求,新增EOP事故处理规程《一回路放射性突然升高》(I RCP 10),其目的是在燃料元件完整性丧失情况下,合理有效地控制核电机组,保证事故产生的放射性不会对运行人员及后续的废物处理过程造成危害。
The draft of event orientation emergency operation procedure （EOP） is based on the research of accident evolution which has been defmed in advance. With the feedback of nuctear events and accidents, and better understanding of nuclear safety, events and accidents which are not considered will be added in EOP. The design and application of new procedure High Activity of Primary Loop（I RCP 10） is based on this kind feedback, and the requirement of the nuclear authority. The purpose of this procedure is to control the nuclear power plant reasonably and effectively in loss of integrity of the fuel elements, and to ensure that the radioactivity will not cause any damage to operators and later waste processing.
出处
《核动力工程》
EI
CAS
CSCD
北大核心
2012年第3期79-82,共4页
Nuclear Power Engineering
关键词
事件导向法事故处理规程
I
RCP
10
核安全
Event orientation emergency operation procedure, I RCP 1 O, Nuclear satety
