期刊文献+

黄麻纤维增强环境友好型摩擦材料的摩擦性能及其可拓评价 被引量:2

Friction performance and extension evaluation of jute fiberreinforced eco-friendly friction materials
下载PDF
导出
摘要 设计并制备了含生物质黄麻纤维和榛子壳粉的新型环境友好型摩擦材料。用CHASE摩擦试验机测定了材料的摩擦性能,用可拓方法对摩擦试验结果进行了评价。摩擦试验结果表明,当鼓温低于黄麻纤维的分解温度时,黄麻纤维具有降低和稳定摩擦系数的作用;当鼓温接近于黄麻纤维的分解温度时,摩擦材料出现热衰退。为了保证摩擦材料在高温的摩擦性能,黄麻纤维的含量不应过高。黄麻纤维的加入可以降低摩擦材料的磨损率。可拓评价结果表明,当黄麻纤维体积分数为9.0%时具有最大的关联度,综合摩擦性能最好。 A new type of eco-friendly friction material containing biomass jute fibers and hazelnut shell powder has been prepared.A chase friction tester was used to determine the friction performance of the materials.The friction performance was evaluated using an extension evaluation method(EEM) and the formulation was optimized.The friction test results showed that jute fibers can stabilize and decrease the friction coefficient when the temperature of the iron drum was lower than the thermal decomposition temperature(Td) of jute fibers,but if the volume content of jute fibers was too high the friction properties could not be maintained at high temperature.Both thickness and weight wear rates decreased significantly after the addition of jute fibers.The EEM results showed that the optimum amount of jute,which gave the best friction performance,was 9.0%.
出处 《北京化工大学学报(自然科学版)》 CAS CSCD 北大核心 2012年第3期55-59,共5页 Journal of Beijing University of Chemical Technology(Natural Science Edition)
关键词 黄麻纤维 摩擦材料 摩擦性能 可拓评价 jute fibers friction materials friction performance extension evaluation
  • 相关文献

参考文献12

  • 1Weckwerth G. Verification of traffic emitted aerosol components in the ambient air of Cologne (Germany)[J].Atmospheric Environment,2001,(32):5525-5536.doi:10.1016/S1352-2310(01)00234-5.
  • 2Hjortenkrans D,Bergb(a)ck B,H(a)ggerud A. New metal emission in road traffic environments[J].Environmental Monitoring and Assessment,2006,(03):85-98.doi:10.1007/s10661-006-7706-2.
  • 3吕亚非.组合摩擦材料研究[J].世界科技研究与发展,2004,26(3):22-26. 被引量:21
  • 4索宝霆,员荣平,吕亚非.苎麻纤维增强环境友好型制动摩擦材料的研究[J].润滑与密封,2010,35(2):15-18. 被引量:6
  • 5Xu X,Cheng G X,Liu F Q. Friction properties of sisal fibre reinforced resin brake composites[J].Wear,2007,(5/6):736-741.
  • 6Seki Y. Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites[J].Materials Science and Engineering A,2009,(1/2):247-252.doi:10.1016/j.msea.2009.01.043.
  • 7Wang H,Huang L,Lu Y F. Preparation and characterization of micro-and nano-fibrils from Jute[J].FIBERS AND POLYMERS,2009,(04):442-445.doi:10.1007/s12221-009-0442-9.
  • 8C(o)pür Y,Güler C,Akgül M. Some chemical properties of hazelnut husk and its suitability for particleboard production[J].Building and Environment,2007,(07):2568-2572.doi:10.1016/j.buildenv.2006.07.011.
  • 9Yun R P,Lu Y F,Filip P. Application of extension evaluation method in development of novel eco-friendly brake materials[J].SAE Int J Mater Manuf,2010,(02):1-7.
  • 10Yun R P,Marthnkova S G,Lu Y F. Performance and evaluation of nonasbestoa organic brake friction composites with SiC particles as an abrasive[J].Journal of Composite Materials,2011,(15):1585-1593.

二级参考文献39

  • 1吕亚非.组合摩擦材料研究[J].世界科技研究与发展,2004,26(3):22-26. 被引量:21
  • 2盛晨兴,严新平,徐泰富.可拓理论在某柴油机磨损状态监测中的应用[J].润滑与密封,2007,32(6):27-30. 被引量:1
  • 3Mohanty A K, Misra M, Drzal L T. Sustainable biocomposites from renewable resources: Opportunities and challenges in the green materials world[J]. J Polyrn Environ, 2002, 10(1/2): 19-26.
  • 4Bhatnagar A, Sain M. Processing of cellulose nanofiberreinforced composites[J]. J Reinf Plast Compos, 2005, 24(12) : 1259 - 1268.
  • 5吕亚非,索宝霆,鲁贻梅,等.环境友好型制动摩擦材料及制备方法:中国,200810227831.7[P].2008-12-01.
  • 6Xue L, Tabil L G, Panigrahi S. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review[J]. J Polym Environ, 2007, 15(1): 25 - 33.
  • 7Belgacem M N, Gandini A. Monomers, Polymers and Composites from Renewable Resources[ M]// Gandini A, Belgacem M N. The state of the art. Amsterdan: Elsevier Science, 2008: 1- 16.
  • 8Wang B, Sain M, Oksman K. Study of structural morphology of hemp fiber from the micro to nanoscale [ J ]. Appl Compos Mater, 2007, 14(1): 89- 103.
  • 9Seydibeyoglu M O, Oksman K. Novel nanocomposites based on polyurethane and micro fibrillated cellulose [ J ].Compos Sci Tech, 2008, 68(3/4): 908-914.
  • 10Mwaikambo L Y, Ansell N P. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization[J]. J Appl Polym Sci, 2002, 84(12): 2222 - 2234.

共引文献25

同被引文献22

  • 1陈斌,董勤军,吴晓金,彭向和,范镜泓.蛤蜊壳的层状微结构与陶瓷/聚合物复合材料的仿生研究[J].功能材料,2004,35(z1):2345-2346. 被引量:10
  • 2凡艳丽,吕亚非.汽车制动过程中摩擦层的作用和形成机制[J].润滑与密封,2007,32(6):125-128. 被引量:19
  • 3蒋学文,朱红旗,季根忠,徐金城,齐陈泽.贝壳微粉改性EP复合材料的力学及摩擦学性能研究[J].工程塑料应用,2007,35(8):13-16. 被引量:9
  • 4Cho K Y, Cho M H, Kim S J, et al. Tribological proper- ties of potassium titanate in the brake friction material; morphological effects[J]. Tribol Lett, 2008, 32 (1): 59- 66.
  • 5Han L, Huang L, Zhang J S, et al. Optimization of ce- ramic friction materials [ J ]. Composites Science and Technology, 2006, 66( 15): 2895-2906.
  • 6Fu Z Z, Suo B T, Yun R P, et al. Development ofeco- friendly brake friction composites containing flax fibers [ J]. Journal of Reinforced Plastics & Composites, 2012, 31 (10) : 681-689.
  • 7Yun R P, Filip P, Lu Y F. Performance and evaluation of eco-friendly brake friction materials [ J ]. Tribol lnt, 2010, 43(11) : 2010-2019.
  • 8Xu X, Cheng G X, Liu F Q. Friction properties of sisal fibre reinforced resin brake composites[ J]. Wear, 2007, 262(5/6) : 736-741.
  • 9Ibhadode A O A, Dagwa I M. Development of asbestos- free friction lining material from palm kernel shell[ J]. J Braz Soc Mech Sci & Eng, 2008, 30(2) : 166-173.
  • 10Boz M, Kurt A. The effect of Al2O3 on the friction per- formance of automotive brake friction materials [ J ]. Tri- bol Int, 2007, 40(7) : 1161-1169.

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部