期刊文献+

框架式重卡驾驶室疲劳分析与评价 被引量:3

Durability Analysis and Evaluation of a Frame-type Heavy Truck Cab
下载PDF
导出
摘要 根据路试采集的载荷谱,制定台架试验方案,利用有限元法与试验法考查某开发车型框架式驾驶室的疲劳耐久性,并将结果与对标车比较;仿真与试验结果吻合,共同考核出该车型的设计薄弱环节.最后,提出一种将加载力的下降速率曲线作为指标来评价驾驶室当量寿命的全新方法. According to loading spectrum collected in the road test, the bench test was designed. Fatigue life simulation and test of a frame-type heavy truck cab were conducted, and the results were compared with those of the benchmark. The results of simulation and test were comparable, and the design weaknesses were checked out. Finally, a new method was proposed that force decreasing rate was regarded as an indicator to evaluate cab's equivalent life.
出处 《同济大学学报(自然科学版)》 EI CAS CSCD 北大核心 2012年第5期723-728,共6页 Journal of Tongji University:Natural Science
基金 上海市科学技术委员会新能源汽车轻量化技术开发项目(08DZ1150300)
关键词 疲劳评价 当量寿命 仿真法与试验法 力下降速率 durability evaluation equivalent life simulation and test methods force decreasing rate
  • 相关文献

参考文献6

二级参考文献18

  • 1王长武,张幼安.随机疲劳分析在机载设备疲劳寿命预测中的应用[J].中国机械工程,2004,15(21):1906-1908. 被引量:26
  • 2何泽民.道路模拟试验技术的研究及其在汽车零部件疲劳试验中的应用:学位论文[M].清华大学汽车工程系,1990..
  • 3杜永昌.多输入多输出系统模态参数辨识方法及多点激振试验模态分析技术:学位论文[M].清华大学汽车工程系,1995..
  • 4王学军.汽车零部件疲劳道路模拟试验远程参数控制系统(RPC)的研制:学位论文[M].清华大学汽车工程系,1993..
  • 5王霄锋.汽车零部件耐久性试验室内模拟研究:学位论文[M].清华大学汽车工程系,1990..
  • 6官飞 王烈 等.汽车的简化模型与车架动应力分析[J].应用力学学报,1985,2(2):85-99.
  • 7Haiba Menmh, Barton D C, Brooks P C. Review of Life Assessment Techniques Applied to Dynamically Loaded Automotive Components [ J ]. Computers and Structures,2002,80:481 - 494.
  • 8Senthilvel Vellaichamy. Transient Dynamic Fatigue Analysis of Automotive Structures Using Proving Ground Road Profiles [ C ]. SAE Paper 2005 - 01 - 0514.
  • 9Gi Seob Choi, Han Ki Min, Seung Hoon Paik. Dynamic Stress Analysis of Vehicle Using Virtual Proving Ground Approach [ C ]. SAE Paper 2000 -01 -0121.
  • 10赵济海.路面平度谱分析应用研究报告[R].长春汽车研究所整车研究室,1985.

共引文献65

同被引文献18

引证文献3

二级引证文献77

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部