期刊文献+

Dispersion of SiC particles in mechanical stirring of A356-SiC_p liquid

Dispersion of SiC particles in mechanical stirring of A356-SiC_p liquid
下载PDF
导出
摘要 In order to clarify the dispersion of SiC particles in straight-blade mechanical stirring of A1-SiCp liquid, the dispersion of SiC particles in A356-3.5% SiCp (volume fraction) liquid in a cylindrical crucible was studied. The relationship between rotating speed of stirrer and radial relative deviation of SiCp content in A356 liquid between the center and the periphery of crucible was established in the conditions of 35° for the gradient angle a of blade and 10 mm/s for the speed of moving up and down of stirrer. The results show that the radial relative deviation of SiCp content increases gradually with increasing the rotating speed of stirrer. When the rotating speed of stirrer is 200 r/min, the vertical dispersion of SiC particles in A356 liquid is even, but the radial relative deviation of SiCp content is 0.24. Consequently, the northomogeneous dispersion of SiC particles in A356 liquid is mainly resulted from the nonhomogeneous radial dispersion of SiC particles. In order to clarify the dispersion of SiC particles in straight-blade mechanical stirring of Al-SiCp liquid,the dispersion of SiC particles in A356-3.5% SiCp(volume fraction) liquid in a cylindrical crucible was studied.The relationship between rotating speed of stirrer and radial relative deviation of SiCp content in A356 liquid between the center and the periphery of crucible was established in the conditions of 35° for the gradient angle α of blade and 10 mm/s for the speed of moving up and down of stirrer.The results show that the radial relative deviation of SiCp content increases gradually with increasing the rotating speed of stirrer.When the rotating speed of stirrer is 200 r/min,the vertical dispersion of SiC particles in A356 liquid is even,but the radial relative deviation of SiCp content is 0.24.Consequently,the nonhomogeneous dispersion of SiC particles in A356 liquid is mainly resulted from the nonhomogeneous radial dispersion of SiC particles.
出处 《Journal of Central South University》 SCIE EI CAS 2012年第6期1503-1507,共5页 中南大学学报(英文版)
基金 Project(50974010) supported by the National Natural Science Foundation of China Project(3093023) supported by the Natural Science Foundation of Beijing,China Project(2009JBM091) supported by the Fundamental Research Funds for the Central Universities of China
关键词 DISPERSION straight-blade mechanical stirring A356-SiCp liquid SiC颗粒 颗粒分散 机械搅拌 液体 A356合金 相对偏差 SiCp 搅拌速度
  • 相关文献

参考文献15

  • 1EICICI R, APALAK M K, YILDIRIM M. Effects of random particle dispersion and size on the indentation behavior of SiC particle reinforced metal matrix composites [J]. Materials and Design, 2010, 31 (6): 2818-2833.
  • 2KUMAR S, BALASUBRAMANIAN V. Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075A1/SiCp P/M composites-A statistical analysis [J]. Tribology International, 2010, 43(I/2): 414-422.
  • 3MOUSAVI ABARGHOUIE S M R, SEYED REIHANI S M. Investigation of friction and wear behaviors of 2024 A1 and 2024 A1/SiCp composite at elevated temperatures [J]. Journal of Alloys and Compounds, 2010, 501(2): 326-332,.
  • 4BOZIC D, DIMCIC B, DIMCIC O. Influence of SiC particles distribution on mechanical properties and fracture of DRA alloys [J]. Materials and Design, 2010, 3 I(I): 134-141.
  • 5SONG M, HE Y H. Effects of die-pressing pressure and extrusion on the microstructures and mechanical properties of SiC reinforced pure aluminum composites [J]. Materials and Design, 2010, 31(2): 985-989.
  • 6HAYAJNEH M, HASSAN A M, ALRASHDAN A B. Prediction of tribological behavior of aluminum-copper based composite using artificial neural network [J]. Journal of Alloys and Compounds, 2009, 470(1/2): 584-588.
  • 7MONDAL D P, DAS S, SURESH K S. Compressive deformation behaviour of coarse SiC particle reinforced composite: Effect of age-hardening and SiC content [J]. Materials Science and Engineering A, 2007, 460/461: 550-560.
  • 8WANG H, ZHANG R, HU X. Characterization of a powder metallurgy SiC/Cu-A1 composite [J]. Journal of Materials Processing Technology, 2008, 197(1/2/3): 43-48.
  • 9ALIZADEH M, PAYDAR M H. Fabrication of AI/SiCv composite strips by repeated roll-bonding (RRB) process [J]. Journal of Alloys and Compounds, 2009, 477(1/2): 811-816.
  • 10SHOROWORDI K M, HASEEB A S M A, CELIS J E Velocity effects on the wear, friction and tribochemistry of aluminum MMC sliding against phenolic brake pad [J]. Wear, 2004, 256(11/12): 1176-1181.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部