期刊文献+

油气润滑系统发展综述 被引量:37

Summary of Oil-air Lubrication System Development
下载PDF
导出
摘要 在回顾油气润滑系统国内外发展历程的基础上,对进入21世纪以来油气润滑系统的发展现状作了综合评述,说明油气润滑系统的理论研究逐步深入,集成方式不断完善,应用场合继续延伸,尤其是与计算机技术、传感检测技术的有机结合,使其在自动化程度、润滑可靠性等方面有了长足的进步。对油气润滑系统的发展前景进行了预测,指出特殊条件下气液两相流体环状流型形成机制、润滑点最佳供油量、系统高可靠性将是未来的发展方向。 On the basis of review of oil-air lubrication system development at home and abroad, the present situation of oil-air lubrication system development in 21 st century was summarized. As the research of the theory of oil-air lubrication system deepening, the system forms constantly are improved, applications are extended, especially organically combining with computer technology, sensor and testing technology, oil-air lubrication system has significant progress in automation degree and lubrication reliability. The development prospects of oil-air lubrication system was predicted. The formation of oil-air two phase flow under special conditions, the optimum oil supply of lubricating points and high reliability of oil-air lubricating system will be development directions in the future.
出处 《润滑与密封》 CAS CSCD 北大核心 2012年第6期91-95,共5页 Lubrication Engineering
基金 河北省秦皇岛市科学技术研究与发展计划项目(201101A147) 国家科技重大专项(2009ZX04005-031)
关键词 油气润滑系统 集中润滑系统 气液两相流 最佳供油量 oil-air lubrication system centralized lubrication system oil-air two phase flow optimum oil supply
  • 相关文献

参考文献16

二级参考文献26

  • 1-.《设备润滑基础》[M].冶金工业出版社,1982..
  • 2Fan K C, Lin J F, Lu S S. Measurement and Compensation of Thermal Error on a Machining Center [ C ]. Proceedings of the 29th MATADOR Conference, UK, 1992,4:261 - 268.
  • 3Lo C H, Yuan J, Ni J. An Application of Real - time Error Compensation on a Turning Center [ J ] , International Journal of Machine Tools and Manufacture, 1995, 35 (12) :1669 - 1682.
  • 4Soons J A, Sparta H A , Schellekens P H. Thermal Error Models for Software Compensation of Machine Tools [ C]. Proceedings of 9th Annual Meeting of American Society for Precision Engineering, 1994, 10 : 69 - 75.
  • 5Ferreira P M, Liu C R. A Method for Estimating and Compensating Quasistatic Errors of Machine Tools [ J ]. ASME, Journal of Engineering for Industry,1993, 115 : 149 - 159.
  • 6Chen J S, Yuan J, Ni J. Thermal Error Modeling for Realtime Error Compensation [ J]. International Journal of Advanced Manufacturing Technology, 1996,12 (4) : 266 - 275.
  • 7yang J, Yuan J, Ni J. Thermal Error Mode Analysis and Robust Modeling for Error Compensation on a CNC Turning Center[ J]. International Journal of Machine Tool and Manufacture, 1999,39:1 367-1 381.:
  • 8Lee J H, Yang S H. Thermal Error Modeling of a Horizontal Machining Center Using Fuzzy Logic Strategy [ J ]. Journal of Manufacturing Processes,2001, 3 (2) :120 - 127.
  • 9Meng H C, Ludman K C. Wear Models and Predictive Equations: Their Form and Content[J]. Wear, 1995, 181 -183 : 443 -457.
  • 10Harmrock B J. Fundamentals of Fluid Film Lubrication [M]. New Jersey: McGraw- Hill, Inc. 1994, 437- 442.

共引文献108

同被引文献227

引证文献37

二级引证文献72

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部