摘要
对静止状态下四丁基溴化铵水溶液在铜板表面上的降温结晶过程进行了研究。结合降温过程的温度测量和可视化研究,得出了水和不同质量分数四丁基溴化铵水合物结晶温度曲线,分析了曲线的异同,并对结晶过程的图像进行了分析讨论。研究表明:铜板表面结晶生成的位置具有随机性;质量分数为10%的TBAB溶液中A型晶体较B型晶体更容易生成,质量分数分别为20%和30%的TBAB溶液中A型晶体与B型晶体同时生成。结晶生长速度与铜板表面纹理方向有关。
The growth process of tetra-n-butyl ammonium bromide solution on copper surface has been investigated. The temperature curves of water and tetra-n-butyl ammonium bromide hydrate in different concentration were obtained. The growth process was monitored by microscopic and the digital photos were caught by CCD camera. Combined with the temperature curves,these photos were compared and explained.The results revealed that the position of crystallization on the copper surface is stochastic. It was found that Type A crystals formed easier than Type B crystals in 10% TBAB solutions. While in 20% and 30% solutions, Type A crystals and Type B crystals formed simultaneously. The growth velocity of the crystals is related to the texture of the copper surface.
出处
《制冷学报》
CAS
CSCD
北大核心
2012年第3期35-39,共5页
Journal of Refrigeration
基金
上海市科委国际合作项目(10160710700)资助~~
关键词
工程热物理
结晶过程
可视化
水
水合物
Engineering thermophysics
Growth process
Visualization
Water
Hydrate
