期刊文献+

纯滑动点接触弹流润滑反常现象的理论分析 被引量:6

Theoretical Analysis of the Abnormal Phenomena in TEHL of Simple Sliding Point Contacts
下载PDF
导出
摘要 对点接触纯滑动弹流润滑进行了理论分析 ,应用“温度 -粘度楔”机理给出了关于 Kaneta等在光干涉弹流实验中观察到的油膜局部增厚的反常现象的合理解释 .数值解说明上述实验中固体表面出现凹陷主要是因热效应所致 . Theoretical analysis to the TEHL in point contacts has been carried out. The abnormal local film thickening phenomena observed by Kaneta and co workers in their optical interferometry experiment was explained reasonably by “temperature viscosity wedge” mechanism. Numerical solutions show that the formation of the dimples on the solid surfaces observed in the experiment is mainly attributed to thermal effects. It is imperative for the formation of dimples that the solid with small thermal conductive coefficient moves and that with big thermal conductive coefficient stationary. The depth of the dimples was largely affected by viscosity pressure coefficient.
出处 《摩擦学学报》 EI CAS CSCD 北大核心 2000年第2期131-134,共4页 Tribology
基金 国家自然科学基金资助项目 !( 5 93 75 2 0 6) 山东省自然科学基金资助项目 !( Y97F0 5 0 89)
关键词 纯滑动 弹流润滑 热效应 凹陷 点接触 simple sliding EHL thermal effect dimple
  • 相关文献

参考文献7

二级参考文献15

  • 1黄平,雒建斌,邹茜,温诗铸.NGY-2型纳米级润滑膜厚度测量仪[J].摩擦学学报,1994,14(2):175-179. 被引量:26
  • 2雒建斌,温诗铸,黄平,史兵.润滑理论的新进展——薄膜润滑[J].润滑与密封,1994,19(6):2-10. 被引量:10
  • 3雒建斌 温诗铸 等.薄膜润滑机理研究[J].清华大学学报,1994,34(3):9-9.
  • 4雒建斌.薄膜润滑理论与实验研究[M].北京:清华大学摩擦学国家重点实验室,1994..
  • 5段世铎 潭逸玲.界面化学[M].北京:高等教育出版社,1991.70-100.
  • 6彭福云.滚动轴承的合理使用[M].上海:上海科学技术文献出版社,1983..
  • 7郭峰.椭圆接触微观热弹流润滑求解的多重网格算法研究[M].青岛:青岛建筑工程学院,1998..
  • 8Luo J B,Chin Sci Bull,1998年,43卷,5期,369页
  • 9Hu Y Z,Wear,1996年,196卷,243页
  • 10雒建斌,清华大学学报,1994年,34卷,3期,9页

共引文献27

同被引文献35

  • 1杨沛然 温诗铸.A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamic Lubrication[J].ASME Journal of Tribology,,1990,(4):631-636.
  • 2曲十月 杨沛然 郭峰.Theoretical Investigation on the Dimple Occurrence in the Thermal EHL of Simple Sliding Steel-Glass Circular Contacts[J].Tribology International,2000,33:59-65.
  • 3朱东.[D].北京:清华大学,1984.
  • 4Ma M T. An expedient approach to the non-Newtonian thermal EHL in heavily loaded point contacts [J]. Wear, 1997, 206, 100-112.
  • 5Kim H J, Ehret P, Dowson D, et al. Thermal elastohydrodynamie analysis of circular contacts. Part 2: nonNewtonian model [J']. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 2001, 2151 353-362.
  • 6Houpert L. New results of traction force calculations in elastohydrodynamic contacts[J]. ASME Journal of Tribology,1985, 107: 241-248.
  • 7Guo F, Yang P, Qu S. On the Theory of thermal elastohydrodynamic lubrication at high slide-roll ratios--Circular glass-steel contact solution at opposite sliding [J]. ASME Journal of Tribology, 2001, 123: 816-821.
  • 8Larsson R, Larsson P O, Eriksson E, et al. Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses [J]. Proceedings of the Institution of Mechanical Engineers: Part J, Journal of Engineering Tribology, 2000, 214:17-27.
  • 9Kaneta M, Nishikawa H, Kameishi K, et al. Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication[J]. ASME Journal of Tribology, 1992, 114: 75-80.
  • 10Kaneta M, Nishikawa H, Kanada T, et al. Abnormal phenomena appearing in EHL contacts[J]. ASME Journal of Tribology, 1996, 118:886-892.

引证文献6

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部