摘要
采用处理能力2 m3/d的试验系统对某生物制药有限公司生产的废水作研究,对于经过化学混凝预处理的废水,通过厌氧折流板反应器(ABR)和膜生物反应器(MBR)联合工艺,出水水质稳定,完全达到GB 21907-2008《生物工程类制药工业水污染物排放标准》
By using the test system with the treatment capacity of 2 m^3/d, the waste water produced in one biological pharmaceutical company was studied. For chemical mixing pretreated waste water, with ABR and MBR combined process, the water quality from outlet is stable and reaches the requirements in GB21907-2008 ＂Discharge Standard of Water Pollutants for Pharmaceutical Industry, Biopharmaceutical Category＂.
出处
《医药工程设计》
2012年第3期55-57,共3页
Pharmaceutical Engineering Design
关键词
生物制药废水
厌氧折流板反应器
膜生物反应器
难降解有机物
Bio-pharmaceutical waste water
anaerobic baffled reactor
membrane bioreactor
refractory organics
