期刊文献+

高内相乳液法制备苯乙烯类毛细管液相整体柱 被引量:1

Preparation of styrene-based monolithic column by HIPE in capillary liquid chromatography
下载PDF
导出
摘要 采用一种新型的高内相乳液法制备了苯乙烯-二乙烯基苯类毛细管液相色谱整体柱.利用组装的微流液相系统对其进行了色谱评价,系统考察了不同的流动相比例及流速对保留时间、分离度、分流比和孔隙率的影响,并用扫描电子显微镜对其形态进行了表征.实验结果表明:所制备的色谱柱可以基线分离硫脲、苯、甲苯及乙苯4种物质,证明这是一种新型有效的整体柱制备方法. A styrene-based monolith was quickly prepared inside the fused-silica capillary,which in situ polymerization was carried out by high internal phase emulsion polymers.The effects of the content of aeetonitrile in mobile phase and flow rate on retention time,resolution,splitting ratio and total porosity were investigated.The morphology of styrene -based monoliths was studied with scanning electron microscopy.Baseline separation of the model analysis was respectively achieved including thiourea,toluene,naphthalene and biphenyl by the developed capillary liquid chromatography system.It is proved that this was an novel effective column preparation technique.
机构地区 河南科技学院
出处 《河南科技学院学报(自然科学版)》 2012年第3期77-81,86,共6页 Journal of Henan Institute of Science and Technology(Natural Science Edition)
基金 2011年河南科技学院校攀登计划创新团队计划资助
关键词 高内相乳液 苯乙烯 毛细管液相色谱 HIPE styrene capillary liquid chromatography
  • 相关文献

参考文献10

  • 1Svec F,Huber C G. Monolithic Materials:Promises,Challenges,Achievements[J].Analytical Chemistry,2006,(07):2100-2107.doi:10.1021/ac069383v.
  • 2Eeltink S,Hilder E F,Geiser L. Controlling the surface chemistry and chromatographic properties of methacrylate-ester-based monolithic capillary columns via photografting[J].Journal of Separation Science,2007,(03):407-413.doi:10.1002/qua.22926.
  • 3Eeltink S,Geiser L,Svec F. Optimization of the porous structure and polarity of polymethacrylate-based monolithic capillary columns for the LC-MS separation of enzymatic digests[J].Joumal of Separation Science Special Issue:Monoliths,2007,(17):2814-2820.
  • 4Abbasian Z,Moghbeli M R. Preparation of highly open porous styrene/Acrylonitrile and styrene/Acrylonitrile/Organoclay polymerized High Internal Phase Emulsion (PolyHIPE) foams via emulsion templating[J].Journal of Applied Polymer Science,2011.3728-3738.doi:10.1111/j.1365-2753.2010.01401.x.
  • 5Brun N,Ungureanu S,Deleuze H. Hybrid foams,colloids and beyond:From design to applications[J].Chemical Society Reviews,2011.771-788.doi:10.1063/1.3484224.
  • 6Tunc Y,Golgelioglu C,Hasirci N. Acrylic-based high internal phase emulsion polymeric monolith for capillary Electrochromatography[J].Journal of Chromatography A,2010.1654-1659.doi:10.1016/j.chroma.2010.01.020.
  • 7Cameron N R,Barbetta A. The influence of porogen type on the porosity,surface area and morphology of poly (divinylbenzene)PolyHIPE foams[J].Journal of Materials Chemistry,2000,(10):2466-2471.
  • 8Carnachan R J,Bokhari M,Przyborskibc S A. Tailoring the morphology of emulsion-templated porous polymers[J].Soft Matter,2006,(02):608-616.
  • 9Zhang Y P,Deng P H,Chen N. Preparation and evaluation of tandem stationary phases for mu-HPLC and capillary electrochromatography[J].Microchimica Acta,2010,(1/2):1-7.doi:10.3200/JACH.56.44.427-436.
  • 10Zhang Y P,Chen N,Zhang Y J. Microwave irradiation used to immobilize the stationary phase in Sol-Gel and organic polymer matrix for micro-HPLC and CEC[J].Asian Journal of Chemistry,2011,(02):733-739.

同被引文献12

  • 1Michael S. Silverstein.Emulsion-templated porous polymers: A retrospective perspective[J].Polymer.2013
  • 2Michael S. Silverstein.PolyHIPEs: Recent advances in emulsion-templated porous polymers[J].Progress in Polymer Science.2013
  • 3NatashaShirshova,AlexanderBismarck,Joachim H.G.Steinke.Ionic Liquids as Internal Phase for Non‐Aqueous PolyHIPEs[J].Macromol Rapid Commun.2011(23)
  • 4D. R.Burke,G.Akay,P. E.Bilsborrow.Development of novel polymeric materials for agroprocess intensification[J].J Appl Polym Sci.2010(6)
  • 5Tamar Gitli,Michael S. Silverstein.Emulsion templated bicontinuous hydrophobic-hydrophilic polymers: Loading and release[J].Polymer.2010(1)
  • 6.Acrylic-based high internal phase emulsion polymeric monolith for capillary electrochromatography[J].Journal of Chromatography A.2010(10)
  • 7陈仙子,周真一,金容,张黎明.介孔材料的制备及应用[J].山东陶瓷,2010,33(4):20-23. 被引量:3
  • 8林谦,高风,周博,鲁琴,黄世强.模板法合成有机硅聚苯乙烯多孔材料及应用[J].有机硅材料,2011,25(6):384-388. 被引量:5
  • 9蔡鑫,郭欢,胡萍,孙争光.高内相比乳液的研究与应用进展[J].胶体与聚合物,2012,30(1):46-48. 被引量:7
  • 10蔡鑫,孙争光,项洪涛,朱杰.交联剂对聚丙烯酸酯多孔材料性能的影响[J].胶体与聚合物,2012,30(4):158-160. 被引量:3

引证文献1

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部