锥形磨浆机磨盘间隙对磨浆性能的影响
The effece of disc gap of conical refiner on refining performance
摘要
锥形磨浆机磨盘间隙对磨浆温度、比能耗和纸浆质量有十分重要的影响。通过实验可以找到优化的磨盘间隙使磨浆性能处于最优值。
Different disc gaps of conical refiner have dramatic influence on refining temperature, spe-cific energy consumption and pulp quality. By trails we learned that there is an optimum disc gap for refining performance.
出处
《湖南造纸》
2012年第2期41-43,共3页
Hunan Papermaking
关键词
锥形磨浆机
磨盘间隙
磨浆温度
磨浆性能
conical refiner
disc gap
refining temperature
refining performance
参考文献6
-
1Hoglund H,Tistad G. Frequency and temperature in chip refining[J].Paperi Ja Puu-Paper and Timber,1977,(03):123-130.
-
2杜诗亮,高东强,梁钱华.磨盘结构和转速对磨浆强度及纤维结构的影响[J].中华纸业,2008,29(18):38-41. 被引量：2
-
3卢谦和.造纸原理与工程[M]北京:中国轻工业出版社,200442-54.
-
4Sundholm J,Heikkurinen A,Mannstrom B. The role of rate of rotation and frequency in refiner mechanical pulping[J].Paperi Ja Puu-Paper and Timber,1988,(05):446-451.
-
5Jackson M,Akeflund G. Preheating and refiner housing pressure affects the quality of TMP and CTMP[J].Tappi Journal,1984,(01):54-58.
-
6Jackson M,Danielsson O,Falk B. Thermopulp- a new energy efficient mechanical pulping process[J].Pulp and Paper Canada,1997,(06):82-89.
二级参考文献8
-
1卢谦和．造纸原理和工程[M]．北京：中国轻工业出版社，2004：96～158．
-
2Karnis A.The mechanism of fibre development in mechanical pulping[J]. Journal of Pulp and Paper Science,1994,20(10): 280-288.
-
3Kure K A,Pahlqvist G.Development of structural fibre properties in high intensity refining[J].Pulp & Paper Canada,1998,99(7): 233-237.
-
4Stationwala M I,Miles K B,Karnis A.Effect of feed rate on refining[J].Journal of Pulp and Paper Science,1994,20(8): 256-240
-
5Reme P A,Helle T Johnsen P O.Fibre characteristics of various mechanical pulp grades[R].Proceedings 1997 International Mechanical Pulping Conference, Stockholm, 1997:297- 308.
-
6Miles K B.A simplified method for calculating the residence time and refining intensity in a chip refiner[J].Paperi ja Puu,1991,75(9):852-857.
-
7Sundholm J,Heikkurinen A,Mannstrom B.The role of rate of rotation and impact frequency in refiner mechanical pulping [J].Paper ja Puu,1988,70(5):446-451.
-
8Sabourin M,Xu E,Musselman R. Evaluation of refiner disc speed,plate design and consistency on high pressure/low residence (RTS) TMP pulps[R].Proceedings 1997 International Mechanical Pulping Conference, Stockholm, 1997:241-249.
-
1HeinrichMuster,HumbertKofler.机械制浆方法的最新发展[J].中国造纸,1997,16(3):63-66.
-
2董继先,梁钱华.新型三锥双流式磨浆机[J].纸和造纸,2007,26(6):24-27.
-
3王治艳,陈嘉川,杨桂花.纤维素酶处理对杨木RMP浆性能的影响[J].华东纸业,2011,42(4):9-14. 被引量：1
-
4王治艳,陈嘉川,隋晓飞.纤维素酶处理对杨木RMP浆性能的影响[J].纸和造纸,2009,28(12):47-50. 被引量：1
-
5沈葵忠,房桂干,刘明山,查全磬.降低磨浆能耗的杨木化机浆制浆技术[J].中国造纸,2002,21(3):32-36. 被引量：14
-
6刘士亮,李世扬.阔叶木浆中浓打浆的生产使用效果[J].浙江造纸,1998(3):1-3.
-
7刘士亮,李世扬,陈中豪,陈坚合.蔗芒浆中浓打浆的生产使用效果[J].广西轻工业,1998(3):31-33.
-
8杨桂花,陈嘉川,穆永生,陈克复.速生杨枝桠材P—RC APMP浆的酶促磨浆[J].华东纸业,2011,42(2):9-14.
-
9杨桂花,陈嘉川,穆永生,陈克复.速生杨枝桠材P-RC APMP浆的酶促磨浆[J].中国造纸学报,2010,25(1):52-56. 被引量：11
-
10卞立平,柳顺熙,蒲云桥,刘长恩,袁麟.盘磨机磨浆性能的评价[J].国际造纸,1997,16(1):28-31. 被引量：4
