期刊文献+

33Mn2V钢热变形本构方程研究 被引量:2

Research on constitutive equation of 33Mn2V steel during hot deformation
下载PDF
导出
摘要 采用压缩实验法在Gleeble-1500热模拟实验机上测定了33Mn2V钢在恒定温度和恒定速度下的变形抗力.研究结果表明:33Mn2V钢热变形的流变应力随温度的升高和应变的增大而减小.以Kumar本构模型为基础建立了33Mn2V钢热变形的本构方程,同时也通过本构模型计算值与实验所得的数据进行比较,表明该模型能够满足工程应用精度. The flow stress of 33Mn2V was measured by upset tests of cylindrical samples in the Gleeble-1500 heat stimula- tion machine. The results showed that the flow stress decreased with the increasing of the deformational tempera- ture and the strain. The Kumar model was verified by comparing the values of calculated with those measured in laboratory conditions. And it showed that the Kumar-type constitutive relationship meets the practical needs.
出处 《天津工业大学学报》 CAS 北大核心 2012年第3期78-80,85,共4页 Journal of Tiangong University
基金 天津自然科学基金(11JCZDJC22600)
关键词 33Mn2V 高温变形 本构方程 流变应力 33Mn2V hot deformation constitutive equation flow stress
  • 相关文献

参考文献4

二级参考文献19

  • 1盛永华,王新云,夏巨谌.7475铝合金高温高应变速率压缩变形的流变应力[J].锻压装备与制造技术,2005,40(4):98-100. 被引量:11
  • 2PIETSH J, THIEVIEN P. FEM simulation of the rotary tube piercing process [J]. Journal of Materials Processing Technology, 2003, 26(2): 52-60.
  • 3CERETTI E, GIARDINI C, ATTANASIO A, et al. Rotary tube piercing study by FEM analysis: 3D simulations and experimental results [J]. Journal of Tube & Pipe Technology, 2004, 17(2): 155-159.
  • 4KOMORI K. Simulation of Mannesmann piercing process by the three dimensional rigid-plastic finite-element method [J]. International Journal of Mechanical Sciences, 2005, 47(12): 1838-1853.
  • 5PATER Z, KAZANECKI J, BARTNICKI J. Three dimensional thermo-mechanical simulation of the tube forming process in Diescher's mill [J]. Journal of Materials Processing Technology, 2006, 177(1-3): 167-170.
  • 6KOBAYASHI S, OH S I, ALTAN T. Metal forming and the finite-element method [M]. New York: Oxford University Press, 1989.
  • 7MSC.Software Corporation. MSC.SuperForm user's guide version 2005 [M]. South Coast Metro: MSC.Software Corporation Press, 2005.
  • 8GONTARZ A, LKASIK K, PATER Z, et al. Technology of forming and modeling of the manufacturing process of screw spikes [M]. Lublin: Lublin University of Technology Press, 2003.
  • 9Lu Yu-qiu, WANG Xian-jin. The fracture mechanism of the centre metal during piercing in Mannesmann piercer and the technological essentials of the piercing process [J]. Iron and Steel, 1980, 15(6): 7-15 (in Chinese).
  • 10FLEISCHER M. Auslegung ausgewahlter schmiedeprozessc mit hilfe der FEM [D]. Aachen : Maschinenbau College, 1996.

共引文献17

同被引文献12

  • 1薛永栋,韩静涛.锻造成形有限元模拟的关键技术及实例分析[J].冶金设备,2007(5):28-31. 被引量:2
  • 2Prasad Reddy G V,Sandhya R,Valsan M,et al.Strain Controlled Fatigue Deformation and Fracture of Nitrogen Alloyed 316LN Austenitic Stainless Steel[J].Transactions of the Indian Institute of Metals,2010,63(2-3):505-510.
  • 3Cho Hyunchul,Kim Gyoung Koo,Kim In Sup,et al.Low Cycle Fatigue Behaviors of Type 316LN Austenitic Stainless Steel in 310 ℃Deaerated Water-fatigue Life and Dislocation Structure Development[J].Materials Science and Engineering A,2008,480:96-100.
  • 4Byun T S,Hashimoto N,Farrell K.Temperature Dependence of Strain Hardening and Plastic Instability Behaviors in Austenitic Stainless Steels[J].Acta Mater,2004,52:3889-3899.
  • 5Byun T S,Lee E H,Hunn J D.Plastic Deformation in 316LN Stainless Steel Characterization of Deformation Microstructures[J].Journal of Nuclear Materials,2003,321:29-39.
  • 6Sellars C M,Tegart W J,Relationship Between Strength and Struc ture in Deformation at Elevated Temperatures[J].Les Memories Scientifiques de La Revue de Metallurgie,1966,63(9):731-745.
  • 7Jonas J J,Sellars C M,Tegart W J.Strength and Structure under Hot Working Conditions[J].International Metallurgical Reviews,1969,130(14):11-24.
  • 8马宁,胡平,闫康康,郭威,孟祥兵,翟述基.高强度硼钢热成形技术研究及其应用[J].机械工程学报,2010,46(14):68-72. 被引量:88
  • 9马彪,韩文龙,李涛,李长生.30Mn27Al4V无磁钢的热变形规律[J].塑性工程学报,2012,19(2):66-69. 被引量:2
  • 10李辉平,赵国群,贺连芳,张磊.热冲压硼钢B1500HS高温本构方程的研究[J].机械工程学报,2012,48(8):21-27. 被引量:35

引证文献2

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部