期刊文献+

Preparation of TiO2/MCM-41 by plasma enhanced chemical vapor deposition method and its photocatalytic activity 被引量:3

Preparation of TiO2/MCM-41 by plasma enhanced chemical vapor deposition method and its photocatalytic activity
原文传递
导出
摘要 Titanium dioxide is coated on the surface of MCM-41 wafer through the plasma enhanced chemical vapor deposition (PECVD) method using titanium isopropoxide (TTIP) as a precursor. Annealing temperature is a key factor affecting crystal phase of titanium dioxide. It will transform an amorphous structure to a polycrystalline structure by increasing temperature. The optimum anatase phase of TiO2 which can acquire the best methanol conversion under UV-light irradiation is obtained under an annealing temperature of 700℃ for 2 h, substrate tem- perature of 500~C, 70 mL. min1 of oxygen flow rate, and 100W of plasma power. In addition, the films are composed of an anatase-rutile mixed phase, and the ratio of anatase to rutile varies with substrate temperature and oxygen flow rate. The particle sizes of titanium dioxide are between 30.3 nm and 59.9nm by the calculation of Scherrer equation. Under the reaction conditions of ll6.8mg.L-1 methanol, 2.9mg.L-1 moisture, and 75~C of reaction temperature, the best conversion of methanol with UV-light is 48.2% by using the anatase-rutile (91.3/ 8.7) mixed phase TiO2 in a batch reactor for 60 min. While under fluorescent light irradiation, the best photoactivity appears by using the anatase-rutile (55.4/44.6) mixed phase TiO2 with a conversion of 40.0%. Titanium dioxide is coated on the surface of MCM-41 wafer through the plasma enhanced chemical vapor deposition (PECVD) method using titanium isopropoxide (TTIP) as a precursor. Annealing temperature is a key factor affecting crystal phase of titanium dioxide. It will transform an amorphous structure to a polycrystalline structure by increasing temperature. The optimum anatase phase of TiO2 which can acquire the best methanol conversion under UV-light irradiation is obtained under an annealing temperature of 700℃ for 2 h, substrate tem- perature of 500~C, 70 mL. min1 of oxygen flow rate, and 100W of plasma power. In addition, the films are composed of an anatase-rutile mixed phase, and the ratio of anatase to rutile varies with substrate temperature and oxygen flow rate. The particle sizes of titanium dioxide are between 30.3 nm and 59.9nm by the calculation of Scherrer equation. Under the reaction conditions of ll6.8mg.L-1 methanol, 2.9mg.L-1 moisture, and 75~C of reaction temperature, the best conversion of methanol with UV-light is 48.2% by using the anatase-rutile (91.3/ 8.7) mixed phase TiO2 in a batch reactor for 60 min. While under fluorescent light irradiation, the best photoactivity appears by using the anatase-rutile (55.4/44.6) mixed phase TiO2 with a conversion of 40.0%.
出处 《Frontiers of Environmental Science & Engineering》 SCIE EI CAS CSCD 2012年第3期304-312,共9页 环境科学与工程前沿(英文)
关键词 PHOTOCATALYST titanium dioxide MCM-41 plasma enhanced chemical vapor deposition (PECVD) photocatalyst, titanium dioxide, MCM-41, plasma enhanced chemical vapor deposition (PECVD)
  • 相关文献

参考文献1

二级参考文献18

  • 1Dong,J.;Seong,K.K.Materials Research Bulletin,2001,4 (6):627.
  • 2Yang,G.X.;Zhuang,H.R.;Biswas,P.Nanostructured Materials,1996,7:675.
  • 3Gurav,A.;Kodas,T.;Pluym,T.Aerosol Sci.Technol.,1993,86:87.
  • 4Hirano,M.;Joji,T.;Inagaki,M.,Ant Ceram.Soc.,2004,87(1):35.
  • 5Ivanova,T.;Harizanova,A.;Surtchev,M.Solar Energy Materials&Solar Cells,2003,76:591.
  • 6Ra~it,K.T.;Willner,L;Bossmann,S H.,Camlysb,2001,204:305.
  • 7Sanjines,R.;Thampi,K.R.;John,K.,Am.Ceram.Soc.1988,71(12):C.512.
  • 8Luo,S;Tang,Z.;Yao,W.H.;Zhang,Z.T.Microelectronic Engineering,2003,66:147.
  • 9Marinsek,M.;Zupan,K.;Maeek,J.Journal of Powder Sources,2002,106:178.
  • 10Leite,E.R.,Varela,J.A.;Longo,E Ceramics International.1995,21:153.

共引文献12

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部