摘要
探讨SM92型剑杆织机的工艺性能优化。以织制缎条纹织物为例,分析了该织机开口动程和开口时间、后梁高度和停经架位置等工艺参数的调整和优化措施;阐述了提高织机效率、降低织疵的有效方法。指出:应根据织物的结构和特性,不断优化上机工艺参数,不断分析织机效率降低及织疵产生的原因,并采取相应的技术措施以发挥设备应有的性能。通过合理配置上机工艺参数,织造时十万纬经停下降到17次,十万纬纬停下降到7次,织机效率提高了17.64个百分点。
Optimization of SM92 rapier loom processing was discussed. Taking satin stripe fabric as example, adjustment and optimization of processing were analyzed including shed travel, shed time, back beam height and warp stop position. Measures of improving loom efficiency and reducing fabric defects were introduced. It is pointed out that loom processing parameter should be optimized, causes of lower loom efficiency and fabric defects should be analyzed constantly according to fabric structure and property. Corresponding measures should be adopted to develop equipment performance. Through rationally selecting loom processing parameter, warp stop per 100 000 weft can be reduced to 17 times, weft stop per 100 000 weft can be reduced to 7 times,loom efficiency can be improved 17.64 percent.
出处
《棉纺织技术》
CAS
CSCD
北大核心
2012年第7期59-61,共3页
Cotton Textile Technology