摘要
以Ho为掺杂元素,采用热压烧结方法制备Bi4-xHoxTi3O12陶瓷,重点研究了Ho掺杂量对其物相组成、致密度、微观结构和铁电性能的影响.首先以Bi2O3、TiO2和Ho2O3微粉为原料,利用固相反应在900℃合成出主晶相为Bi4Ti3O12的Bi4-xHoxTi3O12(x=0~0.8)粉体;然后,将合成粉体在850℃、30 MPa条件下热压烧结,当Ho掺杂量x=0~0.4得到了物相单一、整体致密(>99%)的Bi4-xHoxTi3O12陶瓷.随Ho掺杂量的增加,Bi4-xHoxTi3O12陶瓷的剩余极化强度呈现先增大后减小的趋势,主要与氧空位浓度和不同掺杂浓度引起的掺杂位置的不同有关.在Ho掺杂量x=0.4时,其剩余极化强度最大(2Pr=13.92μC/cm2),远大于未掺杂的Bi4Ti3O12陶瓷,说明适量Ho掺杂能有效改善其铁电性能.
Ho-doped bismuth titanate(Bi4-xHoxTi3O12) ceramics were prepared by hot-press sintering.The effects of Ho doping on the crystalline phase,density,microstructure and ferroelectric property of the ceramics were investigated.At first,Bi4-xHoxTi3O12(x=0 0.8) powders in the main phase of Bi4Ti3O12 were synthesized from Bi2O3,TiO2 and Ho2O3 micro-powders by solid-state reaction at 900℃.The as-synthesized powders were then sintered by hot-press at 850℃ and 30 MPa to prepare Bi4-xHoxTi3O12 ceramics.With the appropriate Ho doping content of x=0 0.4,single-phased and dense(relative density 99%) Bi4-xHoxTi3O12 ceramics were obtained.The remanent polarization(Pr) of the ceramics increased with Ho doping increasing but decreased at x0.4,mainly due to the oxygen vacancy concentration and different doping sites.The Bi4-xHoxTi3O12 ceramics have the highest value of 2Pr=13.92 μC/cm2 at x=0.4,which is higher that that of the undoped Bi4Ti3O12 ceramics.The result indicates that appropriate Ho doping can improve the ferroelectric property of Bi4Ti3O12ceramics.
出处
《无机材料学报》
SCIE
EI
CAS
CSCD
北大核心
2012年第7期721-725,共5页
Journal of Inorganic Materials
基金
科技部国际科技合作项目(2009DFB50470)
湖北省自然科学基金(2009CDB041)
中央高校基本科研业务费专项基金(2010-la-010)~~