期刊文献+

铌铝金属间化合物制备的研究进展

STUDY PROGRESS OF Nb-Al INTERMETALLIC COMPOUND PREPARATION
下载PDF
导出
摘要 铌铝金属间化合物具有高熔点、低密度、良好的高温强度、良好的抗蠕变性能、耐高温氧化性和硫化性等众多优点而得到广泛关注,然而低温脆性和机械加工困难等缺点影响其广泛应用。本文介绍了铌铝金属间化合物制备方法的研究进展。 Nb-Al intermetallic compound is of following advantages: high melting point,low densities,large specific strength at high temperature,large ductility or toughness,good resistance to high temperature oxidation or sulfidation,which has attracted wide attention,however,the disadvantages such as low-temperature brittleness and difficult mechanical process hinder its wide application.This article introduces the study progress of Nb-Al intermetallic compound preparation.
作者 王娜 黄凯
出处 《矿冶》 CAS 2012年第2期47-52,共6页 Mining And Metallurgy
关键词 金属间化合物 Nb3Al 熔盐介质 intermetallic compounds Nb3Al saltmedium
  • 相关文献

参考文献44

  • 1孙康宁 尹衍升 李爱民.金属间化合物/陶瓷基复合材料[M].北京:机械工业出版社,2002.17-22.
  • 2Westbrook J H,Fleischer R L.Intermetallic compounds,principles and practice.Vols 1&2[M].New York:JohnWiley&Sons,1995:1-4.
  • 3Togano K,Kumakura H,Yoshida Y,et al.Fabrication ofsuperconducting composite tapes by a newly developed liq-uid quenching technique[J].IEEE Trans.Magn.,1989,21:463-466.
  • 4Watanabe K,Noto K,Morita H,et al.Nb3Al formation inpowder metallurgy processed wires and sputtered multilayerfilms[J].IEEE Trans.Magn.,1989,25:1984-1987.
  • 5Thieme C L H,Pourrahimi S,Foner S.Nb3Al wire pro-duced by powder metallurgy and rapid quenching from hightemperatures[J].IEEE Trans.Magn.,1989,25:1992-1995.
  • 6Saito S,Hanada S,Ikeda K,et al.Effect of the layerthickness on Nb3Al superconducting wires[J].Mater.Sci.and Eng.B,1990,7(9):31-36.
  • 7Sakae S,Hiroharu S.Superconducting properties of Nb3Alwire fabricated by the clad-chip extrusion method and therapid-heating,quenching and transformation treatment[J].Physica C,2002,372–376:1373-1377.
  • 8Tsuei C C,Chi C C,Frey T,et al.A jelly-roll process forhigh temperature superconducting tapes and wires[J].Ma-ter.Chem.and Phys.,1992,32:95-98.
  • 9Yamada Y,Ayai N,Mikumo A,et al.Development ofNb3Al superconductors for international thermonuclear ex-perimental reactor(ITER)[J].Cryogenics,1999,39:115-122.
  • 10Iijima Y,Kosuge M,Takeuchi T,et al.The DRHQ(double rapidly-heating/quenching)processed Nb3Almultifilamentary conductors show the maximum values ofTc and He2(4.2K)are about 18.4K and 30T[M].Adv.Cryog.Eng.,1994,40:899-905.

二级参考文献70

  • 1陈仕奇,黄伯云.金属粉末气体雾化制备技术的研究现状与进展[J].粉末冶金技术,2004,22(5):297-302. 被引量:52
  • 2李志民,梁国宪,李志超,王尔德.机械合金化Al-Fe-Ni亚微晶合金的性能及热稳定性[J].中国有色金属学报,1995,5(4):102-106. 被引量:4
  • 3李志民,梁国宪,王尔德,霍文灿.机械合金化Al-Fe-Ni粉末热静液挤压致密工艺研究[J].宇航材料工艺,1995,25(2):21-24. 被引量:2
  • 4KUMAR K S, DIPIETRO M S, WHITTENBERGER J D. Compression response of monolithic and particulate-reinforced composites of Al67Ti25Cr8 and Al66Ti25Mny[J]. Acta Metallurgica et Materialia, 1993, 41(5): 1379-1389.
  • 5WANG X M, JHA A, BRYDSON R. In situ fabrication of Al3Ti particle reinforced aluminium alloy metal-matrix composites[J]. Materials Science and Engineering A, 2004, 364(1/2): 339-345.
  • 6MATSUBARA T, SHIBUTANI T, UENISHI K, KOBAYASHI K F. Fabrication of TiB2 reinforced A13Ti composite layer on Ti substrate by reactive-pulsed electric current sintering[J]. Materials Science and Engineering A, 2002, 329/331:84-91.
  • 7SHIM J H, LEE G J, CHO Y W. Mechanochemical synthesis of ultrafine TiA13 powder and its catalytic effect on dehydrogenation of Li3AlH6[J]. Journal of Alloys and Compounds, 2006, 417: 69-71.
  • 8KARABI D, SIDDHARTHA D. A review of the Ti-Al-Ta (titanium-aluminum-tantalum) system[J]. Journal of Phase Equilibria and Diffusion, 2005, 26(4): 322-329.
  • 9胡汉起,金属凝固,1985年,31页
  • 10Dowson A G.Atomization dominates powder production.MPR,1999(1):15-17

共引文献112

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部