期刊文献+

定向凝固Ti-46Al-8Nb合金的微观组织演变与微观偏析(英文)

Microstructure and microsegregation in directionally solidified Ti-46Al-8Nb alloy
下载PDF
导出
摘要 在3~70μm/s的生长速度范围内对Ti-46Al-8Nb(摩尔分数,%)合金进行定向凝固实验,研究其微观组织演变和微观偏析形式。在该生长速度范围内,固-液界面表现为规则的枝晶生长,一次枝晶间距随着生长速度的加快而逐渐减小。在定向凝固过程中观察到典型的L+β→α包晶反应,最终得到具有α2/γ层片和B2相的微观组织。在各个晶粒中,层片与β相枝晶初始生长方向呈0°或45°。包晶反应导致严重的成分偏析,在凝固过程中,铝富集在枝晶间,铌富集在枝晶心部。随着α相的形核和生长,铌的偏析程度逐渐增大,从而促进B2相的析出,而富集在枝晶间的铝在包晶反应发生后逐渐变得均匀、一致。 Directional solidification experiments were conducted for Ti-46Al-8Nb alloy at the growth rates ranging from 3 to 70 pards. The microstructure evolution and microsegregation pattern were investigated. In the range of growth rate, a regular dendritic structure appears and the primary dendrite spacing decreases with increasing growth rate. The peritectic reaction is observed during the solidification and the final microstructure is composed of α2/γ lamellar structure and retained β(B2) after directional solidification The lamellar orientation is found to be parallel and 45° to the primary growth direction ofβ dendrite. Peritectic reaction leads to significant chemical inhomogeneity, in which aluminum is rich in interdendritic liquid and niobium is rich in the core ofβ dendrite during the solidification. With the nucleation and growth of a phase, the segregation amplitude of niobium increases, which promotes the formation of B2 phase, while aluminum rich in the interdendritic becomes homogeneous gradually.
出处 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第6期1342-1349,共8页 中国有色金属学报(英文版)
基金 Projects (50801019,51071062) supported by the National Natural Science Foundation of China Project (2011CB605504) supported by the National Basic Research Program of China
关键词 Ti-46Al-8Nb合金 定向凝固 组织演变 微观偏析 层片取向 Ti-46Al-SNb alloy directional solidification microstructure evolution, microse-gregation lamellar orientation
  • 相关文献

参考文献19

  • 1郑治,江垚,董虹星,汤烈明,贺跃辉,黄伯云.Environmental corrosion resistance of porous TiAl intermetallic compounds[J].中国有色金属学会会刊:英文版,2009,19(3):581-585. 被引量:3
  • 2HUANG S C, SHIH D S. Microstructure-property correlation in TiAl-base alloys [M]. Warrendale, PA: TMS, 1991: 105.
  • 3肖树龙,田竟,徐丽娟,陈玉勇,于宏宝,韩杰才.Microstructures and mechanical properties of TiAl alloy prepared by spark plasma sintering[J].中国有色金属学会会刊:英文版,2009,19(6):1423-1427. 被引量:8
  • 4LIU Z C, L1N J P, LI S J, CHEN G L. Effects of Nb and A1 on the microstructures and mechanical properties of high Nb containing TiAI base alloys [J]. Intermetallics, 2002, 10(7): 653-659.
  • 5DIMIDUK D M. Gamma titanium aluminide alloys--An assessment within the competition of aerospace structural materials [J]. Materials Science and Engineering A, 1999, 263: 281-288.
  • 6LIU C T, SCHNEIBEL J H, MAZIASX P J, WRIGHT J L, EASTON D S. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures [J]. Intermetallics, 1996, 4(6): 429-440.
  • 7TAKEYAMA M O H, MURA Y, KIKUCHI M, MATSUO T. Phase equilibria and microstructural control of gamma TiA1 based alloys [J]. Intermetallics, 1998, 6: 643-646.
  • 8YOSHIHARA M, MIURA K. Effects of Nb addition on oxidation behavior ofTiA1 [J]. Intermetallics, 1995, 3(5): 357-363.
  • 9JARVIS D J, VOSS D. IMPRESS integrated project--An overview paper [J]. Materials Science and Engineering A, 2005, 413-414: 583-591.
  • 10KARTAVYKHA A., GINK1NB V, GANINAB S, REXC S, HECHTCU, SCHMITZD B, VOSSE D. Convection-induced peritectic macro-segregation proceeding at the directional solidification of Ti-46A1-8Nb intermetallic alloy [J]. Materials Chemistry and Physics, 2011, 1-2: 200-206.

二级参考文献27

  • 1HE Yue-hui, JIANG Yao, XU Nan-ping, ZOU Jin, HUANG Bai-yun, EIU C T, LIAW P K. Fabrication of Ti-A1 micro/ nanometer-sized porous alloys through the Kirkendall effect [J]. Adv Mater, 2007, 19: 2102-2106.
  • 2JIANG Yao, HE Yue-hui, XU Nan-ping, ZOU Jin, HUANG Bai-yun, LIU C T. Effects of the Al content on pore structures of porous Ti-Al alloys [J]. Intermetallics, 2008, 16: 327-332.
  • 3POVAROVA K B, ANTONOVA A V, BANNYKH I O. High- temperature oxidation of TiAI based alloys [J]. Metally, 2003, 5: 61-72.
  • 4TENG L, NAKATOMI D, SEETHARAMAN S. Oxidation behavior of TiAl-SNb turbine blade alloy [J]. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2007, 38(3): 477-484.
  • 5GAUTHIER V, DETTENWANGER F, SCHUTZE M, SHEMET V, QUADAKKERS W J. Oxidation-resistant aluminide coatings on gamma-TiAl [J]. Oxidation of Metals, 2003, 59(3/4): 233-255.
  • 6ZHAO Bin, WU Jian-sheng, SUN Jian, TU Bi-jun, WANG Fei. Oxidation kinetics of the nitrided TiAl-based alloys [J]. Materials Letters, 2002, 56(4): 533-538.
  • 7FU C L, YOO M H. Elastic constants, fault energies, and dislocation reactions in TiAI: A first-principles total-energy investigation [J]. Philosophical Magazine Letters, 1990, 62(3): 159-165.
  • 8YAO Zhong-ping, JIANG Zhao-hua, WANG Fu-ping, HAO Guo-dong. Oxidation behavior of ceramic coatings on Ti-6Al-4V by micro-plasma oxidation [J]. Journal of Materials Processing Technology, 2007, 190(1/3): 117-122.
  • 9YOSHIHARU I, MASAO K, MASAYUKI T, HARUHIKO K. Oxidation behavior of Al-containing ferritic stainless steel in an exhaust gas atmosphere [J]. Journal of the Japan Institute of Metals, 2006, 70(11): 880-889.
  • 10AHN H, LEE D, LEE K M, LEE K, BAEK D, PARK S W. Oxidation behavior and corrosion resistance of Ti-10Ta-10Nb alloy [J]. Surface and Coatings Technology, 2008, 202(22/23): 5784-5789.

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部