摘要
为解决传统钢制大型天线辐射梁单元重量大、重复安装精度差、易腐蚀等问题,采用钢制球形接头与碳纤维复合材料管材胶接组合的方式,对复合材料管材和胶接接头进行了合理设计,成功制造出某大型天线轻质复合材料辐射梁单元。对此辐射梁单元进行了有限元分析与实测研究,能够很好地满足天线使用要求。结果表明:与传统的钢制辐射梁单元相比,复合材料天线辐射梁单元减重50%左右,辐射梁刚度好、强度大,安装一致性好、精度高,特别适合重复安装的大型天线。
Abstract： To solve the problems of steel radial beam, such as heavy weight, low repeated installation accura- cy, corrosive, lightweight composite material radial beam unit of some sort of large antenna has been made by adopting the bonding of carbon fiber composite pipe with steel spherical joint and the rational design of com- posite pipes and bonding joints. Finite element analysis and actual tests of the lightweight composite material radial beam unit of antenna are carried out in this paper. The results indicate that compared with steel radial beam, lightweight composite material radial beam has 50% weight decrease, higher stiffness, strength and precision. It is especially suitable for the large antenna which is installed repetitively and can fully meet the antenna application requirements.
出处
《电子机械工程》
2012年第3期48-50,共3页
Electro-Mechanical Engineering
关键词
碳纤维复合材料管材
辐射梁单元
胶接接头
carbon fiber composite material pipe
radial beam unit
bonding joint
