期刊文献+

Effect of Rare Earth Alloy Modification on High Carbon Equivalent Gray Cast Iron of Automotive Brake Drum 被引量:1

Effect of Rare Earth Alloy Modification on High Carbon Equivalent Gray Cast Iron of Automotive Brake Drum
下载PDF
导出
摘要 Effect of rare earth alloy modification on properties and microstructure of high carbon equivalent gray cast iron was investigated.The experimental results show that in the way of mechanical property,when the addition of rare earth alloy is 0.2% and 0.3%,the tensile strength of cast iron increases.In the way of microstructure,the addition of rare earth alloy increases the number of primary austenite dendrites,reduces secondary dendritic arm spacing,and changes the eutectic size and quantity.When rare earth alloy is added into gray cast iron,the morphology and quantity of graphite play a major role on the improvement of tensile strength. Effect of rare earth alloy modification on properties and microstructure of high carbon equivalent gray cast iron was investigated.The experimental results show that in the way of mechanical property,when the addition of rare earth alloy is 0.2% and 0.3%,the tensile strength of cast iron increases.In the way of microstructure,the addition of rare earth alloy increases the number of primary austenite dendrites,reduces secondary dendritic arm spacing,and changes the eutectic size and quantity.When rare earth alloy is added into gray cast iron,the morphology and quantity of graphite play a major role on the improvement of tensile strength.
作者 张道文
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第4期725-729,共5页 武汉理工大学学报(材料科学英文版)
关键词 rare earth alloy MODIFICATION tensile strength high carbon equivalent rare earth alloy modification tensile strength high carbon equivalent
  • 相关文献

参考文献13

  • 1Sheng D, Liu JC. Cast Irons Containing Rare Earth[M]. Beijing: Tsinghua University'Press, 2000:156-157.
  • 2Greenhill JM. Importance of Low Levels of Phosphorus in Gray Iron Castings[J]. Foundry Trade,1981,(19):787-791.
  • 3Doepp R, Schwenkel S. Contribution to the Influence of ChemicalComposition and Cooling Condition on the Eutecfic Solidification Rang of Fe-C-X-melts[J]. Materials Science and Engineering, 2005,413(8):334-338.
  • 4Kondo Y. Gray Iron Cast in Metal Mold. IV. Fine Graphite Structure in Cast Iron[R]. Nagoya,Reports of the Government Industrial Research Institute,1980,29(10):291-297.
  • 5Kondo Y, Yasue K, lsotani M. Gray Iron Cast in Metal Mold. IV. Impact Strength of Grey lron Cast in Metal Mold[R]. Nagoya,Reports of the Government Industrial Research Institute,1 980,29(12):362-367.
  • 6Sil'man G L. Phase Diagram of Alloys of the Fe-C-Mn System and Some Structural Effects IN This System.Part 1.Interphase Distribution of Manganese[J]. Metal Science and Heat Treatment, 2005,47(1-2):48-52.
  • 7Batas CE. Effects of Alloy Elements on the Sn-cngth and Micros- tructure of Gray Cast iroms[J]. AFS Tram., 1984,(92):923-946.
  • 8Gesari SB, Pronsato ME, Juan A. Effect of Manganese on Grain Boundary Segregation of Sulfur in Iron[J].Applied Surface Science, 2007,253(7):5939-5942.
  • 9Riposan I, Chisarnera M, Sofroni L, et al. Contributions to the Study of the Solidification Mechanism and of the Influence of Structure on the Properties of Compacted/Vermicular Graphite Cast IroniC. In: Physical Metallurgy of Cast. Proceedings of the third International Symposium, 1985:131-140.
  • 10Sage AM, Dawson JVA. High-Carbon,V-Mo,High-Strenglh Gray Cast Iron for Castings Subjected to Thermal Fatigue[J]. AFS Trans., 1992, 100(96):253-263.

同被引文献8

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部