期刊文献+

基于无网格方法的复合材料层合板固有频率及特征值灵敏度分析 被引量:2

Natural frequency analysis and eigenvalues sensitivity analysis of composite laminates based on meshless method
下载PDF
导出
摘要 文章基于无网格法和弹性力学Hamilton正则方程,研究了复合材料层合板固有频率和特征值灵敏度分析问题。首先,结合径向基插值函数和修正后的H-R变分原理,推导了Hamilton正则方程的无网格列式。然后,以Multiquadric(MQ)、Gaussian(EXP)和薄板样条(TPS)为基函数,计算了复合材料层合板的固有频率及其特征值的灵敏度系数。文中的工作使得无网格法的优越性与弹性力学Hamilton正则方程的半解析法得到了有机的结合,为Hamilton正则方程提出了一种新的特征值灵敏度分析方法。 Abstract:Based on meshless method and Hamilton canonical equation, the problem of natural frequency and eigenvalues sensitivity analysis was investigated for composite laminates. Firstly, meshless formulation of Hamilton canonical equation was derived by combining the modified Hellinger-Reissner variational princi- ple and the radial interpolation functions. And then, based on the shape functions of Multiquadric (MQ), Gaussian (EXP) and thin plane spine (TPS), the natural frequencies of the single laminated plates were ob- tained by the meshless formulation of Hamilton canonical equation. This study introduced the advantages of meshless method into semi-analytic solution of Hamilton canonical equation, and a new eigenvalues sensi- tivity analysis method was presented for Hamilton canonical equation.
出处 《船舶力学》 EI 北大核心 2012年第7期820-828,共9页 Journal of Ship Mechanics
基金 国家自然科学基金民航联合研究基金(编号:60979001) 中国民航大学校级重大项目(编号:CAUA2009ZD0101)资助
关键词 固有频率 灵敏度分析 无网格法 HAMILTON正则方程 径向基插值函数(RPIM) H-R变分原理 natural frequency sensitivity analysis meshless method Hamilton canonical equation radial interpolation method (RPIM) H-R varitional principle
  • 相关文献

参考文献23

  • 1Afonso S M B, Hinton E. Free vibration analysis and shape optimization of variable thickness plates and shells-lI. Sensi- tivity analysis and shape optimization[J]. Computing Systems in Engineering, 1995, 6(1): 47-66.
  • 2Pederson P. On sensitivity analysis and optimal design of specially orthotropic laminates[M]. USA: Engng Optimiz, 1987.
  • 3Reiss R, Ramachandran S. Maximum frequency of symmetric angle-ply laminates[M]. USA: Compos. Struct., 1987.
  • 4Cawley P, Adams R D. The predicted and experimental natural modes of free-free CFRP plates[M]. USA: J Composite Material, 1978.
  • 5钟万勰.应用力学对偶体系[M].北京:科学出版社,2003.
  • 6卿光辉,邱家俊,塔娜.压电材料修正后的H-R混合变分原理及其层合板的精确法[J].工程力学,2005,22(5):43-47. 被引量:21
  • 7刘艳红,李家宇,卿光辉.压电热弹性材料四边简支层合板的精确解[J].工程力学,2008,25(4):230-235. 被引量:7
  • 8Cheng Zhenqiang, Batra R C. Three-dimensional asymptotic analysis of muhiple-electrode piezoelectric laminates[J]. American Institute of Aeronautics and Astronautics Journal (AIAA Journal), 2000, 38(2): 317-325.
  • 9Zou Guiping, Tang Limin. A semi-analytical solution for laminated composite plates in Hamiltonian system[J] Methods in Applied Mechanics and Engineering, 1995, 128(2): 295-404.
  • 10Qing Guanghui, Qiu Jiajun, Liu Yanhong, Free vibration analysis of stiffened laminated plates[J]. International Journal of Solids and Structures, 2006, 43(6): 1357-~371.

二级参考文献29

  • 1郭兆璞,陈浩然,杨正林.复合材料层合板在加工固化后期降温速率对残余热应力的影响[J].计算结构力学及其应用,1995,12(4):387-393. 被引量:16
  • 2杨正林,Proceeding of ICAM’96,1996年,605页
  • 3杨正林,博士学位论文,1996年
  • 4Gandhi M V, Thompson B S. Smart Materials and Structures[M]. Chapman & Hall, London, 1992.
  • 5Ray M C, Rao K M, Samanta B. Exact solution for static analysis of and intelligent structure under cylindrical bending[J]. Computers and Structures, 1993, 47(6):1031-1042.
  • 6Bisegna P, Maceri F. An exact three-dimensional solution for simply supported rectangular piezoelectric plates[J].Journal of Applied Mechanics, 1996, 63(3): 628-638.
  • 7Heyliger P. Exact solutions for simply supported laminated piezoelectric plates[J]. Journal of Applied Mechanics. 1997,64(2): 299-306.
  • 8Heyliger P, Brooks S. Exact solutions for laminated piezoelectric plates in cylindrical bending[J]. Journal of Applied Mechanics, 1996, 63: 903-910.
  • 9Sosa H A, Castro M A. Electroelastic analysis of piezoelectric laminated structures[J]. Applied Mechanics Review, 1993, 46: 21-28.
  • 10Kim J, Varadan V V, Varadan V K. Finite element modeling of structures including piezoelectric active devices[J]. International Journal Numerical Methods Engineering, 1997, 40(5): 817-832.

共引文献44

同被引文献57

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部