摘要
利用Moldflow Plastics Insight软件对洗衣机盛水桶的成型工艺条件进行了优化,得出优化的注射工艺条件为:模具温度60℃,熔体温度240℃,注射压力48 MPa,保压压力38.4 MPa,注射时间10s,保压时间33s,冷却时间为22s。该优化分析结果得到很好的实践验证。
Moldflow Plastics Insight software was used to stimulate injection molding process of water tub in washing machine. The optimized process parameter that is mold temperature of 25℃ ,melt temperature of 240 ℃, injection pressure of 48 MPa, holding pressure of 38.4 MPa,inection time of 10 s, holding time of 33 s,eooling time of 22 s, is gained. And this result is identified by practice.
出处
《现代塑料加工应用》
CAS
北大核心
2012年第4期36-38,共3页
Modern Plastics Processing and Applications
关键词
洗衣机盛水桶
注射成型
工艺参数正交试验计算机辅助工程
washing machine water tub
injection molding
process parameters
or-thogonal test
computer aided engineering
