期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

提高注射成型塑料制品熔接痕强度的研究进展 被引量：5

Advances in Improving Strength of Weld Line of Injection Molding Plastic Parts
下载PDF
导出
摘要 论述了熔接痕的形成原因,分析了熔接痕的微观结构,介绍了通过改善加工方法增强熔接痕强度的措施,指出了增强熔接痕强度研究的开发方向、技术动态和发展趋势。 Mechanism of weld lines formation is summarized. Microstructure of weld line is analysed. Optimization processing methods of improving weld lines strength are introduced. Moreover, new processing scenario, as well as technical trend and developing of improving strength of weld line are also discussed.
作者 刘珂君 陈亮 刘洪 张杰
机构地区 四川大学高分子科学与工程学院
出处 《现代塑料加工应用》 CAS 北大核心 2012年第4期57-60,共4页 Modern Plastics Processing and Applications
基金 国家自然科学基金(50873072) 国家重点实验室专项经费联合资助
关键词 熔接痕 优化 注射成型 加工方法 述评 weld line optimization injection molding processing method review
分类号 TQ320.67 [化学工程—合成树脂塑料工业]
  • 相关文献

参考文献16

  • 1周殿明.塑料注塑成型技术问答[M].北京:机械工业出版社,2010.
  • 2Selden R. Effect of processing on weld line strength in five thermoplastics[J]. Polym Eng Sci, 1997, 37(1): 205-218.
  • 3Fathi S, Behravesh A H. Visualization analysis of flow behavior during weld-line formation in injection molding process[J]. Polymer-Plastics Technology and Engineer- ing, 2008,47(7) : 666-672.
  • 4Xie L, Leester-Schadel M,Ziegmann G,et al. Effect of physical vapor deposition metallic thin films on micro injection molded weld line mechanical properties [J]. Mierosystem Technologies 2010,16(6):1009-1013.
  • 5Simon L, Ricardo G U J,Rub"n G N,et al. LDPE/a gave fibre composites: Effect of coupling agent and weld llne on mechanical and morphological properties [J]. Rapra Technology: Shrewsbury, ROYAUME- UNI, 2008,16(6):115-123.
  • 6Kobayashi Y, Teramoto G,Kanai T. The unique flow of polypropylene at the weld line behind an obstacle in injection molding[J]. Polymer Engineering & Science, 2011,51(3) :526-531.
  • 7Zhou Y, Mallick P K. Fatigue performance of injection- molded short e-glass fiber reinforced polyamide-6,6. Ⅱ. Effects of melt temperature and hold pressure[J]. Pol- ymer Composites, 2011, 32 (2):268-276.
  • 8Piecarolo S, Rallis A,Titomanlio G. Effect of injection moulding conditions on knit line formation[J]. Plastics and Rubber Proceessing and Applications, 1987,8(3): 181-184.
  • 9Wu C H,Liang W J. Effects of geometry and injec tion-molding parameters on weld-line strength[J]. Pol ymer Engineering & Science, 2005, 45 (7): 1021- 1030.
  • 10Lim J C,Cho K Y,Park J K. Weld line characteristics of PC/ABS blend. II. Effect of reactive compatibilizer [J]. J Appl Polym Sci, 2008, 108(6):3632-3643.

二级参考文献73

  • 1CHEN S C, JONG W R, CHANG J A. Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line [J]. Journal of Applied Polymer Science, 2006, 101: 1 174-1 180.
  • 2THEILADE U A, HANSEN H N. Surface microstructure replication in injection molding [J]. International Journal of Advanced Manufacturing Technology, 2006, 33(1-2): 157-166.
  • 3JANSEN K M B. Heat transfer in injection moulding systems with insulation layers and heating elements [J]. International Journal of Heat and Mass Transfer, 1995, 38(2): 309-316.
  • 4YAO D G, KIM B. Increasing flow length in thin wall injection molding using a rapidly heating mold[J]. Polymer-Plastic Technology and Engineering, 2002 , 41(5): 819-832.
  • 5CHEN S C, CHANG Y, CHANG T H et al. Influence of using pulsed cooling for mold temperature control on microgroove duplication accuracy and warpage of the Blu-ray Disc[J]. International Journal of Heat and Mass Transfer, 2004, 31(7): 971-980.
  • 6YAO D G, KIM B. Development of rapid heating and cooling systems for injection molding applications [J]. Polymer Engineering & Science, 2002, 42(12): 2 471-2 481.
  • 7CHANG P C, HWANG S J. Simulation of infrared rapid surface heating for injection molding [J]. International Journal of Heat and Mass Transfer, 2006, 49(21-22): 3 846-3 854.
  • 8楊坤穎.感應加動態模溫即時監視與控溫方式之研究[D].台灣:中原大學,2007.
  • 9LIN Yuwan, LI Haimei, CHEN S C, et al. 3D numerical simulation of transient temperature field for lens mold embedded with heaters [J]. International Journal of Heat and Mass Transfer, 2005, 32(9): 1 221-1 230.
  • 10葉俊鋒.氣體輔助動態模溫控制系統建置與分析之研究[D].台灣:中原大學,2007.

共引文献61

同被引文献46

引证文献5

二级引证文献14

现代塑料加工应用
2012年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部