期刊文献+

玻纤增强聚酰胺6/蒙脱土复合材料的制备及其力学性能研究 被引量:1

Research on Preparation and Mechanical Properties of Glass Fiber Reinforced Polyamide 6/Montmorillonite Composites
下载PDF
导出
摘要 通过螺杆挤出法制备了玻璃纤维增强聚酰胺6/蒙脱土复合材料,利用电子万能试验机对复合材料的力学性能进行了测量,并对实验结果进行了分析。结果表明,随着玻璃纤维含量的增加,聚酰胺6/蒙脱土/玻璃纤维复合材料的拉伸强度和冲击强度相应地增大,且长度为12mm的玻璃纤维增强的复合材料比6mm玻璃纤维增强的复合材料高;当玻璃纤维含量为10%(质量分数,下同)时,12mm玻璃纤维增强的复合材料的拉伸强度和冲击强度分别比聚酰胺6/蒙脱土复合材料提高了17.4%和84.1%。 Glass fibers reinforced polyamide 6/montmorillonite composites were prepared via screw extruding method. Their mechanical properties were measured by an electronic all-powerful tester. It was observed that the tensile and impact strengths of the composites increased with increasing content of glass fiber. At a same loading, the strengths based on 12 mm glass fiber were higher than those on 6 mm glass fiber. When the content of glass fibers was 10 % (12 ram),the tensile strength and impact strength of the composites respectively improved 17. 4% and 84. 1 compared with those of the plain polyamide 6/montmorillonite composites.
出处 《中国塑料》 CAS CSCD 北大核心 2012年第7期43-45,共3页 China Plastics
基金 国家自然科学基金项目(51002128)
关键词 聚酰胺6 蒙脱土 玻璃纤维 螺杆挤出 力学性能 polyamide 6 montmorillonite glass fiber screw extruding mechanical property
  • 相关文献

参考文献5

二级参考文献59

  • 1程晓春,金叶玲.利用蒙脱土制备尼龙纳米复合材料的研究进展[J].矿产综合利用,2005(5):27-31. 被引量:4
  • 2李强,赵竹第,欧玉春,漆宗能,王佛松.尼龙6/蒙脱土纳米复合材料的结晶行为[J].高分子学报,1997,7(2):188-193. 被引量:86
  • 3漆宗能 李强 赵竹第等.一种聚酰胺/粘土纳米复合材料及其制备方法[P].CN 1138593A.1996-06-05.
  • 4OKADA A, KAWASUMI M, KURAUCHI T, et al. Synthesis and characterization of a nylon6-clay hybrid [J ]. Polym. Prepr.,1987, 28: 447-448.
  • 5TANG Z Y, KOTOV N A, GIERSIG M. Spontaneous organization of single CdTe nanoparticles into luminescent nanowires [ J ].Science, 2002, 297: 237-240.
  • 6GIANNELIS E P. Polymer-layered silicate nanoeomposites: synthesis, properties and applications [J]. Applied Organometallic Chemistry, 1998, 12(10/11) : 675-680.
  • 7VAIA R A, KRAMER E J, GIANNELIS E P, et al. Kinetics of polymer melt intercalation [J ]. Macromolecules, 1995, 28: 8080- 8085.
  • 8Akkapeddi M K. Glass fiber reinforced polyamide 6 nanocomposites [ J ]. Polymer Composites,2000,21 (4) :576 - 585.
  • 9Clifforda M J, Tong W. Fiber reinforced nanocomposites:mechanicalproperties of PA6/clay and glass fibre/PA6/clay nanocomposites[ J]. Polymer,2010,51 (2) :535 -539.
  • 10Cho J W, Paul D R. Nylon6 nanocomposites by melt compounding [ J ]. Polymer,2001,42 ( 3 ) : 1083 - 1094.

共引文献9

同被引文献2

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部