期刊文献+

Measurements of flame temperature by femtosecond CARS

Measurements of flame temperature by femtosecond CARS
原文传递
导出
摘要 Time-resolved femtosecond coherent anti-Stokes Raman spectroscopy (fs-CARS) is utilized to measure the methane/oxygen/nitrogen flame temperature at atmospheric-pressure. The measurements are performed using the CARS signal of N2 with 40-fs laser pulses in the first few picoseconds after the initial in-phase excitation. Flame temperatures at 300 and 1 325 K are measured, the experimental results show good agreements with theoretical ones and present a good repeatability. Time-resolved femtosecond coherent anti-Stokes Raman spectroscopy (fs-CARS) is utilized to measure the methane/oxygen/nitrogen flame temperature at atmospheric-pressure. The measurements are performed using the CARS signal of N2 with 40-fs laser pulses in the first few picoseconds after the initial in-phase excitation. Flame temperatures at 300 and 1 325 K are measured, the experimental results show good agreements with theoretical ones and present a good repeatability.
出处 《Chinese Optics Letters》 SCIE EI CAS CSCD 2012年第B06期208-209,共2页 中国光学快报(英文版)
  • 相关文献

参考文献9

  • 1T. R. Meyer, S. Roy, R. P. Lucht, and J. R. Gord, Combust. Flame 142, 52 (2005).
  • 2S. Roy, T. R. Meyer, M. S. Brown, V. N. Velur, R. P. Lucht, and J. R. Gord, Opt. Commun. 224,1317 (2003).
  • 3Z. Hu, J. Liu, Z. Zhang, X. Guan, M. Huang, and X. Ye, Chin. Opt. Lett. 1, 395 (2003).
  • 4J. R. Gord, T. R. Meyer, and S. Roy, Annu. Rev. Anal. Chern. 1, 663 (2008).
  • 5S. Roy, J. R. Gord, and A. K. Patnaik, Prog. Energ. Combust. 36, 280 (2010).
  • 6P. Beaud, H. M. Frey, T. Lang, and M. Motzkus, Chern. Phys. Lett. 344, 407 (2001).
  • 7R. P. Lucht, S. Roy, T. R. Meyer, and J. R. Gord, Appl. Phys. Lett. 89, 251112 (2006).
  • 8G. Knopp, P. Beaud, P. Radi, M, Tulej, B. Bougie, D. Cannavo, and T. Gerber, J. Raman Spectrosc. 33, 861 (2002).
  • 9R. E. Palmer, (Sandia National Labs., Livermore, 1989).

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部