Numerical method of static aeroelastic correction and jig-shape design for large airliners

In this paper,a coupled CFD-CSD method based on N-S equations is described for static aeroelastic correction and jig-shape design of large airliners.The wing structural flexibility matrix is analyzed by a finite element method with a double-beam model.The viscous multi-block structured grid is used in aerodynamic calculations.Flexibility matrix interpolation is fulfilled by use of a surface spline method.The load distributions on wing surface are evaluated by solving N-S equations with a parallel algorithm.A flexibility approach is employed to calculate the structural deformations.By successive iterations between steady aerodynamic forces and structural deformations,a coupled CFD-CSD method is achieved for the static aeroelastic correction and jig-shape design of a large airliner.The present method is applied to the static aeroelastic analysis and jig-shape design for a typical large airliner with engine nacelle and winglet.The numerical results indicate that calculations of static aeroelastic correction should employ tightly coupled CFD-CSD iterations,and that on a given cruise shape only one round of iterative design is needed to obtain the jig-shape meeting design requirements.