摘要
Ionic liquids can replace conventional solvents in aromatic/aliphatic extractions, if they have higher aromatic distribution coef- ficients and higher or similar aromatic/aliphatic selectivities. Also physical properties, such as density and viscosity, must be taken into account if a solvent is applied in an industrial extraction process. Cyano-containing ionic liquids have a lower den- sity than the benchmark solvent sulfolane and a higher viscosity. Sulfolane is from a hydrodynamic point of view a better sol- vent than ionic liquids for the aromatic/aliphatic extraction. The most suitable ionic liquids for the extraction of aromatic hy- drocarbons from a mixture of aromatic and aliphatic hydrocarbons are [bmim]C(CN)3, [3-mebupy]N(CN)2, [3-mebupy]C(CN)3, [3-mebupy]B(CN)4 and [mebupyrr]B(CN)4. They have factors of 1.2-2.3 higher mass-based distribution coefficients than sul- folane and a similar or higher, up to a factor of 1.9 higher, aromatic/aliphatic selectivity than sulfolane. The IL [3-mebupy]N(CN)2 is a better extractant for the separation of toluene from a mixture of toluene/n-heptane in a pilot plant Ro- tating Disc Contactor (RDC) than sulfolane.
Ionic liquids can replace conventional solvents in aromatic/aliphatic extractions, if they have higher aromatic distribution coef- ficients and higher or similar aromatic/aliphatic selectivities. Also physical properties, such as density and viscosity, must be taken into account if a solvent is applied in an industrial extraction process. Cyano-containing ionic liquids have a lower den- sity than the benchmark solvent sulfolane and a higher viscosity. Sulfolane is from a hydrodynamic point of view a better sol- vent than ionic liquids for the aromatic/aliphatic extraction. The most suitable ionic liquids for the extraction of aromatic hy- drocarbons from a mixture of aromatic and aliphatic hydrocarbons are [bmim]C（CN）3, [3-mebupy]N（CN）2, [3-mebupy]C（CN）3, [3-mebupy]B（CN）4 and [mebupyrr]B（CN）4. They have factors of 1.2-2.3 higher mass-based distribution coefficients than sul- folane and a similar or higher, up to a factor of 1.9 higher, aromatic/aliphatic selectivity than sulfolane. The IL [3-mebupy]N（CN）2 is a better extractant for the separation of toluene from a mixture of toluene/n-heptane in a pilot plant Ro- tating Disc Contactor （RDC） than sulfolane.
