摘要
根据ISO 13660标准建议的测量方法,使用基于扫描仪的数字印刷质量检测系统进行了线条印刷质量评价和分析。采用液体墨粉和固体墨粉的静电照相数字印刷机,分别在2种不同类型纸张上输出了数字印刷品作为测试样张。根据检测系统测得的数据,分别从线宽、粗糙度和模糊度等ISO 13660定义的线条和字符质量属性,分析和评估了2款数字印刷机输出的印刷品的线条质量。测量分析发现,由于2款数字印刷机在成像系统、结构设计和墨粉上的差异,使其线条质量上也存在差异。
According to ISO 13660, Line quality was analyzed and evaluated by using a digital printing quality measurement system based on a scanner. The test sheets were printed by two xerographic digital presses, one of which used liquid toner and the other used solid toner, on two types of paper respectively. The line quality of two digital presses was analyzed and evaluated in line width, raggedness, and blurriness, which are line and character attributes defined in ISO 13660. The measurement results showed that the line quality is different due to the difference of imaging system, structure design and toner used in the two digital Dresses.
出处
《包装工程》
CAS
CSCD
北大核心
2012年第15期97-103,共7页
Packaging Engineering
基金
上海市教育委员会科研创新项目(12YZ198)