期刊文献+

基于床层膨胀特性的生物流化床设计方法 被引量:3

下载PDF
导出
摘要 本文以液—固两相流态化的基本理论为出发点 ,结合生化反应的特征 ,阐述了生物流化床床层内部的固相载体和生物膜的特性 ,以及液固两相在流体力学和生化反应动力学方面的行为及其相互关系 ,在此基础上提出了一套较为科学、实用和简便的两相生物流化床反应器的设计方法 。
出处 《中国给水排水》 CAS CSCD 北大核心 2000年第6期28-31,共4页 China Water & Wastewater
  • 相关文献

参考文献1

  • 1蔡平(译),气液固流态化工程,1993年

同被引文献45

  • 1周平,王世和.生物膜厚度对流化床反应器性能影响分析[J].环境科学,1994,15(2):1-5. 被引量:12
  • 2李安婕,刘红,王文燕,全向春,张丹,李宗良.生物活性炭流化床净化采油废水的效能及特性[J].环境科学,2006,27(5):918-923. 被引量:30
  • 3傅金祥,顾丹亭,李微,陈东宁.曝气生物滤池复合式接种挂膜试验研究[J].沈阳建筑大学学报(自然科学版),2007,23(3):478-481. 被引量:5
  • 4Pugnava N,Payrandeau M,Thomberg D.Simultaneous nitrification and denitrification in biofilters with realtime aeration control[J].War Sci Tech,2001,43(1):269-276.
  • 5Satoshi T,Joseph A,Takayuki M,et al.Dynamic modeling and simulation of a three-phase fluidized bed batch process for wastewater treatment[J].Process Biochemistry,2002,38(4):599-604.
  • 6Patel A,Zhu J,Nakhla G.Simultaneous carbon、nitrogen and phosphorous removal from municipal wastewater in a circulating flnidized bed bioreact[J].Chemosphere,2006,65(7):1103-1112.
  • 7Weber W J ,et al. Physical-chemical treatment of wastewater.J Wat Pollut Control Fed, 1970,42 ( 1 ) : 83 - 87.
  • 8Khang S J , et al. A practical wake model for estimating bed expansion and holdup in three phase fluidized systems. AIChE Symp Series, 1983,222 : 47 - 54.
  • 9Diez Blanco,et al. Effects of biofilm growth, gas and liquid velocity on the expansion of an anaerobic fluidized bed reactor( AFBR). Wat Res , 1995,29 (7) : 1649 - 1654.
  • 10Richardson J F, et al. Sedimentation and fluidisation. Part 1 Trans Instn Chem Eng , 1954,32 : 35 - 53.

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部