期刊文献+

泡桐单板染色因素对色差的影响 被引量:15

Effects of Paulownia Veneer Dyeing Factors to the Chromatism
下载PDF
导出
摘要 本文采用酸性大红染料对木材进行染色试验 ,以染液组成和染色工艺为试验因素 ,用正交方法对木材色差和上染率进行观测和分析。试验结果表明 ,Na Cl是使泡桐单板染色色差增加的第一作用因素 ,最佳浓度是 1 .5%。处理温度是第二作用因素 ,50℃的温度对色差和上染率都是有利的。表面活性剂是第三作用因素 ,最佳浓度是 0 .1 %。最佳染色时间 4 h,作用因素居第四位。乙酸最佳作用浓度 2 % ,是第五作用因素。染料浓度变化对色差没有造成明显的变化 ,染料浓度 0 .5%时上染率最高 ,染料利用率也高 。 The chromatism and dye up take were studied by orthogonal method according to the changes of the parameters of dyeing. The 0.5 mm sliced Paulownia veneer was dyed in aqueous solution of the acid bright red. The result showed that NaCl concentration was the most important factor to the chromatism of dyed samples before and after dyeing , and the best concentration was 0.5%. The dyeing temperature was the second factor and 50 ℃ was appropriate to both chromatism and dye up take. The concentration of surface active agent was the third factor and best concentration was 0.1%. As the 4th factor, the most suitable treating time was 4 hours .Acetic acid was the 5th factor to dyeing effects of Paulownia veneer with the best concentration of 2%. There was not obvious change in chromatism caused by concentration change of dye solution , and the best concentration was 0.5% in dye up take .
出处 《木材工业》 北大核心 2000年第4期10-12,共3页 China Wood Industry
关键词 泡桐单板 染色 酸性大红染料 色差 上色率 Paulownia veneer Dyeing Technology
  • 相关文献

参考文献3

二级参考文献10

  • 1段新芳,李坚.木材涂饰前基材表面处理方法[J].北京木材工业,1996,16(1):7-13. 被引量:4
  • 2王锡春.涂装技术[M].化学工业出版社,1987..
  • 3陈云英.人造径切木制造中单板深度染色工艺的探讨[J].北京木材工业,1989,(1):39-39.
  • 4基太村洋子.染色材的耐光性评价方法.基太村洋子研究业务报告书[M].日本:林业试验场林产化学部,1986.3-9.
  • 5樱川智史.木材的染色和光变色的防治[J].日本:木材工业,1996,(3):102-106.
  • 6添野丰.木材浸渍着色技术进展[J].日本:涂装工学,1992,2:50-56.
  • 7平林靖彦.壳聚糖处理木材的表面改性(Ⅰ):水溶性染料均匀染色性的改善效果[J].日本:涂装工学,1987,(10):10-15.
  • 8基太村洋子.木材浸透性染料的选定[J].日本:木材工业,1975,30(10):449-451.
  • 9刘骅,游致敏.箱纸板染色技术[J].纸和造纸,1998,17(1):20-21. 被引量:7
  • 10蔡文祥.彩色皱纹纸的染色[J].纸和造纸,1998,17(1):22-22. 被引量:2

共引文献60

同被引文献132

引证文献15

二级引证文献81

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部