摘要
带有金属接头的橡胶软管总成产品是汽车十分重要,甚至是关键部件。为使该产品满足设计要求,有时就需对金属接头上铁套的铆合部位实行较为准确定位,同时还需解决因铁套在铆合过程中由于塑性伸长对定位挡块刚性破坏问题。为此,就需要一款能够自主适应铁套在铆合过程中的塑性伸长-组合在金属铆爪上的定位挡块,从而达到以铁套端面为定位基准铆合制作产品之目的。
The rubber hose assemblies with metal connector are very important, even key components to the car. The iron on the riveting metal fitting often requires more accurate positioning in order to make the products meet the design requirements and also requires solve the problem of iron set in the riveting processes by plastic elongation of the positioning block rigid destruction. To do this, you need an able to independently adapt to iron plastic elongation in the riveting process the combination of the positioning of the metal Hveting claw block, so as to achieve the purpose of making products of riveted iron sets of the face -locating datum.
出处
《山东化工》
CAS
2012年第7期82-84,共3页
Shandong Chemical Industry
关键词
铁套塑性变形
主适应功能定位挡块
摆角
plastic deformation of the iron
independent positioning of the adaptation function block
tilt angle