期刊文献+

镉离子印迹硅胶的制备与吸附性能 被引量:5

Synthesis and Adsorption Behavior of Cd(Ⅱ)-Imprinted Silica Gel
下载PDF
导出
摘要 采用表面印迹技术和溶胶-凝胶法,以Cd(Ⅱ)离子作为印迹离子,硫氰基丙基三甲氧基硅烷为功能分子,环氧氯丙烷为交联剂,在硅胶表面制备Cd(Ⅱ)离子印迹聚合物(IIP-TCPTS/SiO2),并利用平衡吸附法研究了聚合物吸附性能和选择识别能力。结果表明,最大吸附量为16.7 mg/g;20 min即可达到吸附平衡;当pH值在5.4-7.8范围内,印迹聚合物保持了较好的吸附容量;印迹聚合物对Cd(Ⅱ)离子具有较强的选择性识别能力;重复使用时性能稳定。 A ion-imprinted thiocyanato-functionalized silica gel sorbent was synthesized by the combination of surface imprinting technique with sol-gel process with Cd( II ) as the template, 3-thiocyanatopropyltriethoxysilane as the functional monomer, and epichlorohydrin as the cross-linking agent for selective removal of Cd(II) from aqueous solution. The Cd(II)-imprinted thiocyanato -functionalized silica sorbent was characterized by FT-IR, SEM and the static adsorption-desorption experiment method. The results show that the imprinted sorbent offers a fast kinetics for the adsorption and desorption of Ccl(II), has a substantial binding capacity in the range of pH 5.4--7.8 and can be used repeatedly. The static uptake capacity is 16.7 mg/g. The selectivity coefficient of imprinted sorbent is higher than that of the non-imprinted sorbent.
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2012年第8期163-166,共4页 Polymer Materials Science & Engineering
基金 国家青年科学基金(21107076) 辽宁省博士科研启动基金(20111048)
关键词 溶胶-凝胶 硫氰基丙基三甲氧基硅烷 离子印迹 cadium sol-gel 3-thiocyanatopropyltriethoxysilane ion imprinted
  • 相关文献

参考文献9

  • 1吕运开,严秀平.分子印迹溶胶-凝胶材料的制备及应用[J].分析化学,2005,33(2):254-260. 被引量:33
  • 2Rao T P, Daniel S, Gladis J M. Tailored materials for preconcentration or separation of metals by ion-imprinted polymers for solid-phase extraction (IIP-SPE) [J ]. Trends in Analytical Chemistry, 2004, 23(1): 28-35.
  • 3范洪涛,孙挺,董佳,仝桂锋,隋殿鹏.离子印迹聚合物及其在分析化学中的应用[J].化学通报,2009,72(1):10-14. 被引量:17
  • 4Fang G Z, Tan J, Yah X P. An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II) [J]. Analytical Chemistry, 2005,77(6) : 1734-1739.
  • 5Rao T P, Kala R, Daniel S. Metal ion-imprinted polymers-novel materials for selective recognition of inorganics [ J ]. Analytica Chimica Acta, 2006, 578 (2) : 105-116.
  • 6Shamsipur M, Fasihi J, Ashtari K. Grafting of ion-imprinted polymers on the surface of silica gel particl~ through covalently surfaeebound initiators: a selective sorbent for uranyl ion [J ]. Analytical Chemistry, 2007, 79 (18): 7116-7123.
  • 7Lu Y K, Yan X P. An imprinted organic-inorganic hybrid sorbent for selective separation of cadmium from aqueous solution [ J ]. Analytical Chemistry, 2004, 76 (2): 453-457.
  • 8Jiang N, Chang X, Zheng H, et al. Selective solid-phase extraction of nickel (II) using a surface-imprinted silica gel sorbent [J ]. Analytica Chimica Acta, 2006, 577 (2): 225-231.
  • 9Say R, Birlik E, Ersoz A, et al. Preeoncentration of copper on ion- selective imprinted polymer microbeads[J]. Analytiea Chimiea Acta, 2003, 480 (2). 251-258.

二级参考文献114

共引文献48

同被引文献88

引证文献5

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部