摘要
采用C5分离装置得到的单烯烃馏分对间戊二烯石油树脂进行改性,研究了单烯烃加入量、溶剂比和催化剂加入量等工艺参数对树脂性能的影响。结果表明,路标漆用间戊二烯石油树脂的最佳聚合工艺条件为:单烯烃加入量为33.0%,溶剂比为0.6以及催化剂的加入量为0.85%。
A piperylene-based petroleum resin was modified by the monoolefin fraction from C5 separation unit. The effects of process parameters for the amount of monoolefin, catalyst and ratio of solvent on resin performance were studied. The results showed that traffic paint with the optimum of piperylene petroleum resin polymerization conditions the amount of monoolefin was 33.0%, ratio of solvent was 0.6 and catalyst amount was 0.85%
出处
《应用化工》
CAS
CSCD
2012年第8期1399-1401,共3页
Applied Chemical Industry
关键词
间戊二烯石油树脂
单烯烃
聚合工艺
piperylene petroleum resin
monoolefin
polymerization technique