期刊文献+

不同冷轧压下量对亚稳态奥氏体不锈钢00Cr17Ni7织构的影响 被引量:4

Effect of Cold Reduction on Texture Evolution in Cold-Rolled Metastable Austenitic Stainless Steel 00Cr17Ni7
原文传递
导出
摘要 采用X射线衍射技术(XRD)研究了不同冷轧压下量对亚稳态奥氏体不锈钢00Cr17Ni7织构的影响,分析了亚稳态奥氏体不锈钢00Cr17Ni7中马氏体相和奥氏体相的织构变化情况。研究结果表明,不同冷轧压下量下,00Cr17Ni7中的奥氏体相织构主要由Brass{110}<112>、Goss{110}<001>和少量的Copper{112}<111>、S{123}<634>组成,并且随着压下量的增加Brass和Goss织构强度显著提高;同时马氏体相织构主要以{115}<110>、{112}<110>、{111}<112>、{332}<113>组成,织构的形成主要归因于"Kurdjumov-Sachs取向关系"和"体心立方金属轧制织构类型演变的特点"共同作用的结果。 The effect of cold reduction on texture of metastable austenitic stainless steel 00Cr17Ni7 was investigated by using X-ray diffraction.The texture evolution of martensite and austenite phases with cold reduction was analyzed.The results show that the main texture component of austenite phase is Brass {110},Goss{110} and a minor Copper {112},S{123}.The texture intensity of Brass and Goss increases with the increasing cold reduction.The main texture components of martensite phase are {115},{112} and {111},{332},which can results from the "Kurdjumov-Sachs relationship" and "the rolling texture evolution characteristics of BCC metal".
出处 《钢铁研究学报》 CAS CSCD 北大核心 2012年第8期53-57,共5页 Journal of Iron and Steel Research
关键词 奥氏体不锈钢 织构 冷轧压下 奥氏体相 马氏体相 austenitic stainless steel texture cold rolling reduction austenite phase martensite phase
  • 相关文献

参考文献11

  • 1Spencer K, Embury J D, Conlon K T, et al. Strengthening via the Formation of Strain Induced Martensite in Stainless Steels [J]. Mater Sei Eng A,2004(873) :387.
  • 2De A K, Speer J G, Matlock D K. Deformation-Induced Phase Transformation and Strain Hardening in Type 304 Austenitic Stainless Steel [J]. Metall Mater Trans A,2006(37):18.
  • 3Lichtenfeld J A, Mataya M C, VanTyne C J. Effect of Strain Rate on Stress Strain Behavior of Alloy 309 and 304L Austenitic Stainless Steel [J]. Metall Mater Trans A,2006(37) :147.
  • 4Kumar B Ravi, Mahato B. Comparison of Rolling Texture in Low and Medium Stacking Fault Energy Austenitic Stainless Steels [J]. Mater SciEng A,2005(394):296.
  • 5Ravi Kumar B, Singh A K, Das Samar, et al. Cold Rolling Texture in AISI 304 Stainless Steel[J]. Mater Sci Eng A, 2004(364) : 132.
  • 6Angeline Poulon Quintin, Stephanie Brochet, Jean Bernard Vogt, et al. Fine Grained Austenitie Stainless Steels: The Role of Strain Induced a' Martensite and Reversion Mecha nism Limitations [J]. ISIJ International,2009,49(2):293.
  • 7Hirsch J, Lucke K. Mechanism of Deformation and Develop ment of Rolling Textures in Polycrystalline fcc Metals-II[J]. Acta Metallurgica, 1988,36(11):28.
  • 8Kumar E Ravi, Singh A K, Das Samar, et al. Cold Roiling Texture in AISI 304 Stainless Steel [J]. Mater Sei Eng A, 2004(364) : 132.
  • 9Humphreys F J, Hatherly M. Recrystallisation and Related Phenomenon [M]. Oxford: Elsevier,1995.
  • 10Dillamore I L, Roberts W T. Rolling Textures in fcc and bcc Metals [J]. Acta Metallurgiea,1964,12(3):281.

同被引文献32

引证文献4

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部