期刊文献+

Phase transformation and liquid density redistribution during solidification of Ni-based superalloy Inconel 718 被引量:3

Phase transformation and liquid density redistribution during solidification of Ni-based superalloy Inconel 718
下载PDF
导出
摘要 The influences of chemical segregation and phase transformation on liquid density variation during solidification of Ni-based supperalloy Inconel 718 were investigated using SEM and EDS. It was found that significant segregation in liquid prompts high Nb phase to precipitate directly from liquid, which results in the redistribution of alloy elements and liquid density in their vicinity. The term "inter-precipitate liquid density" is therefore proposed and this concept should be applied to determine the solidification behavior of superalloy Inconel 718. The influences of chemical segregation and phase transformation on liquid density variation during solidification of Ni-based supperalloy Inconel 718 were investigated using SEM and EDS. It was found that significant segregation in liquid prompts high Nb phase to precipitate directly from liquid, which results in the redistribution of alloy elements and liquid density in their vicinity. The term "inter-precipitate liquid density" is therefore proposed and this concept should be applied to determine the solidification behavior of superalloy Inconel 718.
出处 《China Foundry》 SCIE CAS 2012年第3期263-268,共6页 中国铸造(英文版)
基金 supported by the National Natural Science Foundation of China under a grant No. 50974144
关键词 Inconel 718 Nb segregation phase transformation inter-precipitate density inversion Inconel 718 Nb segregation phase transformation inter-precipitate density inversion
  • 相关文献

参考文献4

二级参考文献36

共引文献10

同被引文献23

  • 1张海泉,赵海燕,张彦华,李刘合,张行安.镍基高温合金电子束焊接热影响区微裂纹特征分析[J].材料工程,2005,33(3):22-25. 被引量:23
  • 2王玲,于永泗,娄琅洪,朱耀霄,杨春军.时效处理对Rene’220合金力学性能的影响[J].宇航材料工艺,2005,35(5):44-47. 被引量:1
  • 3王玲,董建新,田玉亮,谢锡善.GH3044合金宏观偏析行为及凝固过程中元素偏析规律研究[J].稀有金属材料与工程,2006,35(9):1408-1411. 被引量:19
  • 4郭磊,王玲,董建新,张麦仓,郑磊.GH742合金等温凝固过程中偏析规律的研究[J].稀有金属材料与工程,2007,36(11):1942-1946. 被引量:2
  • 5Li R B, Yao M, Liu W C, et al. Isolation and determination for $, " and T" phases in Inconel 718 alloy[J]. Scripta biaterialia, 2002, 46(9) : 635 -638.
  • 6Chang S H. In situ TEM observation of 7', 7" and $ precipitations on Inconel 718 superalloy through HIP treatment [ J]. Journal of Alloys and Compounds, 2009, 486(1/2) : 716- 721.
  • 7Wang L, Li C Q, Dong J X, et al. An investigation of micreseg- regation and liquid density redistribution during solidification of In- conel 718 [ J ]. Chemical Engineering Communications, 2009, 196 (6) : 754 - 765.
  • 8Wang L, Yijun Y, Dong J X, et al. Effect of cooling rates on seg- regation and density variation in the mushy zone during solidifica- tion of superalloy Inconel 718 [ J]. Chemical Engineering Commu- nications, 2010, 197(12): 1571-1589.
  • 9Antonsson T, Fredriksson H. The effect of cooling rate on the so- lidification of Inconel 718 [ J]. Metallurgical and Materials Trans- actions B-Process Metallurgy and Materials Processing Science, 2005, 36 ( 1 ) : 85 - 96.
  • 10Huang X, Richards N L, Chaturvedi M C. Effect of grain size on the weldability of cast alloy 718 [ J]. Materials and Manufacturing Processes, 2004, 19(2) : 285 -311.

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部