1Lap K. Yeung, Ke-Li Wu,Yuanxun E. Wang. Low-Temperature Cofired Ceramic LC Filters for RF Applications [J].Microwave Magazine, IEEE,2008,9(5):118-128.
2Kwang Lim Choi, Nanju Na, Swanfinathan.Characterization of embedded passives using macromodels in LTCC technology [J].Compo- nents, Packaging, and Manufacturing Technology, Part B'. Advanced Pack- aging,IEEE, 1998,21 (3) :258 -268.
3Varadan, V. V.; Kim, I. K.Fabrication of 3-D Metamaterials Us- ing LTCC Techniques for High-Frequency Applications [J].Components, Packaging and Manufacturing Technology,IEEE,2012,99:1.
1LEW D W, PARK J S, AHN D, et al. A design of the ceramic chip balun using the multilayer configuration [J]. IEEE Trans MTT, 2001, 49(1): 220-224.
2SCHWINDT R, NGUYEN C. A CAD procedure for the double-layer broadside-coupled Marchand balun [C]//1994 IEEE MTT-S Int Dig. San Diego, USA: IEEE, 1994.
3ROGERS J, BHATIA R. A 6 to 20 OHz planar balun using a Wilkinson divider and Lange couplers [C]// 1991 IEEE MTT-S lnt Dig. Boston, USA: IEEE, 1991.
4FUJIKI Y, MANDAI H, MORIKAWA T. Chip type spiral broadside coupled directional couplers and baluns using low temperature co-fired ceramic [C]// 1999 IEEE Electronic Components and Technology Conference. San Diego, USA: IEEE, 1999.
5TANG C W, SHEEN J W, CHANG C Y. Chip-type LTCC-MLC baluns using the stepped impedance method [J]. IEEE Trans MTT, 2001, 49: 2342-2349.
6CHONGCHEAWCHAMNAN M C Y, ROBERTSON I D. Analysis and design of a high-performance planar Marchand balun [C]//2002 IEEE MTT-S Dig. Washington, USA: IEEE, 2002.
7TANG C W, CHANG C Y. A semi-lumped balun fabricated by low temperature co-fired ceramic [C]//2002 IEEE MTT-S Dig. Washington, USA: IEEE, 2002.
8TANG C W, CHANG C Y. LTCC-MLC chip-type balun realised by LC resonance method [J]. Electron Lett, 2002, 38:519-520.
9TANG C W, CHANG C Y. Using buried capacitor in LTCC-MLC balun [J]. Electron Lett, 2002, 38: 801-803.
10ANG K S, LEONG Y C, LEE C H. Analysis and design of miniaturized lump-distributed impedance-transforming baluns [J]. IEEE Trans MTT, 2003, 51(3): 1009-1017.
