摘要
选取经过三道次冷轧后0.5 mm厚的铝箔坯料,研究在相同退火温度和保温时间下升温时间对坯料性能和成品铝箔针孔率的影响,确定了较短时间升温能够得到较小尺寸的化合物,有利于提高坯料力学性能及降低成品铝箔的针孔率。
Aluminum foil blank of 0.5 mm after three times cold rolling were selected.The effects of heating time on the performance and the pinhole rate of product aluminum foil were studied at the same annealing temperatures and annealing time.The results show that the quick heat can get small size of the compound,help improve the mechanical performance and reduce blank finished product aluminum foil pinhole rate.
出处
《热加工工艺》
CSCD
北大核心
2012年第16期175-176,共2页
Hot Working Technology
基金
云南省科技厅(2011AA002)
关键词
升温时间
力学性能
针孔率
heating time
mechanical performance
pinhole rate
