期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

基于CPLD_DSP的三相程控精密测试电源的设计 被引量：2

The Design of Three Phase High Precision Testing Power Program-controlled Based on CPLD_DSP
下载PDF
导出
摘要 介绍了基于CPLD_DSP的三相程控精密测试电源的设计方案。采用CPLD控制RAM产生6路DDS信号(三路电压,三路电流)作为测试电源的基准信号,控制串行DA芯片LTC1595B实现电压、电流幅度的调节,同时采集键盘的信息发送给DSP;利用DSP控制宽屏液晶实现数据的在线显示,采集电压、电流信号进行计算并做闭环处理,同时向CPLD发送控制命令。经过测试,系统输出频率分辨率达到0.001Hz,电压、电流输出精度达到0.02%,整体系统运行良好。 The paper introduces a design of three phase high precision testing power program-controlled based on CPLD_DSP. CPLD is programmed to control RAM and generate six DDS signal （three voltage signal and three current signal）. The six DDS signal is used as based signal of testing power, and CPLD is programmed to control serial D/A chip named LTC1595B to adjust the value of voltage and current. The information collected from keyboard is sent to DSP. Wide-screen LCD is controlled by DSP to show data on line. Voltage signal and current signal are collected and computed and closed loop by DSP, and the same time controlling command is sent to CPLD. After testing, the output frequency resolution of the system achieves 0.001Hz.The voltage and current control precision achieves 0.02%. The whole system is running very well.
作者 李慧 李景
机构地区 淮阴工学院
出处 《电测与仪表》 北大核心 2012年第8期79-83,共5页 Electrical Measurement & Instrumentation
基金 淮安市新型自动化技术应用中心项目(HAP201107)
关键词 测试电源 CPLD 频率分辨率 输出精度 testing power, CPLD, frequency resolution, output precision
分类号 TM910.2 [电气工程—电力电子与电力传动]
  • 相关文献

参考文献9

二级参考文献42

共引文献88

同被引文献22

  • 1M. Chen and G. A. Rincon - Mora, "Accurate electrical battery model capable of predicting runtime and iv performance, " [ C ] IEEE transactions on energy conversion, 2006(21 ) : 504 - 511.
  • 2F. Zhang, D. M. Fratantoni, D. Paley, J. Lund, and N. E. Leon- ard, Control of coordinated patterns for ocean sampling[ J ], Interna- tional Journal of Control, 2007, 80(7 ) : 1186 - 1199.
  • 3F. Xia and Y. Sun, "Control - scheduling co - design : A perspective on integrating control and computing," in Dynamics of Continuous, Discrete and Impulsive Systems - Series B: Applications and Algo- rithms, Special Issue on ICSCA' 06. Rome, Italy: Watam Press, 2006:1352 - 1358.
  • 4X. Liu, Q. Wang, W. He, M. Caccamo, and L. Sha, "Optimal real - time sampling rate assignment for wireless sensor networks," [ Z ] ACM Transactions on Sensor Networks (TOSN), 2006, 2(2) : 263 -295.
  • 5Kim, H. , and Shin, K. G. On dynamic reconfiguration of a large- scale battery system. In Proceedings of the 15th IEEE Symposium on Real- Time and Embedded Technology and Applications (Washing- ton, DC, USA, 2009) [ C ]. IEEE Computer Society, 2009 : 87 - 96.
  • 6Coleman, M. , Hurley, W. , and Lee, C. K. An improved battery characterization method using a two - pulse load test [ C ]. IEEE Trans- actions on Energy Conversion, 2008, 23 (2): 708- 713.
  • 7Chen, M. , and Mora, R. Accurate electrical battery model capable of predicting runtime and I - V performance[ C ]. IEEE Transcations on Energy Conversion 21, 2006, 6(2) : 504 -512.
  • 8Zhang, F. , Szwaykowska, K. , Mooney, V. , and Wolf, W. Task scheduling for control oriented requirements for cyber - physical sys- tems[ C]. In Proc. of 29th IEEE Real - Time Systems Symposium ( Barcelona, Spain) , 2008 : 47 - 56.
  • 9Schweighofer, B. , Raab, K. , and Brasseur, G. Modeling of high power automotive batteries by the use of an automated test system [J ]. IEEE Transactions on Instrumentation and Measurement, 2003, 52(4) : 1087 - 1091.
  • 10徐猛,李智.恒流源在高精度数字多用表中的设计与实现[J].电测与仪表,2009,46(5):72-75. 被引量：21

引证文献2

二级引证文献4

电测与仪表
2012年 第8期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部