期刊文献+

一种时域—码域联合的认知无线电频谱感知算法

Joint time-code spectrum sensing algorithm for cognitive radio
下载PDF
导出
摘要 为了提高认知无线电系统中频谱感知的性能,对多维联合的频谱感知进行了研究,提出一种时域—码域联合的频谱感知算法。该算法主要利用了直接序列扩频主用户信号频谱空间中时域与码域的特性,分别从时域与码域的角度对信道的状态进行检测,其中时域采用能量感知,码域分析扩频主用户信号的二次功率谱,最终共同确认信道状态。仿真结果表明,联合感知算法对应的检测性能优于单纯时域或码域感知,能够直接应用于直接序列扩频主用户的频谱感知。 In order to improve the performance of spectrum sensing in cognitive radio systems,this paper studied the multi-dimensional spectrum sensing,and proposed a joint time-code spectrum sensing algorithm.The proposed algorithm utilized the characteristics of primary signals with direct-sequence spread spectrum in both the time domain and the code domain,and detected the state of the channel from both time domain and code domain perspectives using energy detection in the time domain and analyzing power spectrum of primary users in the code domain.Finally it confirmed the state of the channel together.Simulation results show that the performance of the joint algorithm outperforms the single time-domain or code-domain spectrum sensing algorithm.The proposed algorithm is applicable in spectrum sensing of primary users with direct-sequence spread spectrum
出处 《计算机应用研究》 CSCD 北大核心 2012年第9期3391-3393,3410,共4页 Application Research of Computers
基金 国家自然科学基金资助项目(61172055,61162008) 广西自然科学基金资助项目(2011GXNSFB018072) 广西教育厅科研项目(201012MS080)
关键词 认知无线电 频谱感知 联合感知 扩频 cognitive radio spectrum sensing joint sensing spread spectrum
  • 相关文献

参考文献9

  • 1MITOLA J, MAGUIRE G Q. Cognitive radios: making software radios more personaI[J]. IEEE Personal Communications, 1999,4(6): 13-18.
  • 2IAN F A,LEE W Y,MEHMT C V, et al. Next generation/ dynamic spectrum access/ cognitive radio wireless networks : a survey [ J ]. Computer Networks,2006,50(13) :2127-2159.
  • 3申达.认知无线电频谱检测技术研究[D],上海:上海交通大学, 2009.
  • 4YUCEK T, ARSLAN H. A survey of spectrum sensing algorithms for cognitive radio applications[ J]. IEEE Communications Surveys & Tutorials,2009,11 (1) :116-130.
  • 5GANESAN G, LI Ye, BING B, et al. Spatiotemporal sensing in cognitive radio networks [ J ]. IEEE Journal on Selected Areas in Communications,2008,26(1) :5-l2.
  • 6TUAN D, BRIAN L M. Joint spatial-temporal spectrum sensing for cognitive radio networks [ C ] //Proc of the 43rd Annual Conference on Information Sciences and Systems. 2009:124-129.
  • 7WANG Bei-bei,RAY K J. Advances in cognitive radio networks : a survey[ J]. IEEE Journal of Selected Topics in Signal Processing,2011,5(1) :5-23.
  • 8张天骐,林孝康,周正中.一种直扩信号伪码周期及序列的盲估计方法[J].电波科学学报,2005,20(3):400-405. 被引量:27
  • 9金艳,姬红兵,罗军辉.一种基于循环统计量的直扩信号检测与参数估计方法[J].电子学报,2006,34(4):634-637. 被引量:46

二级参考文献16

  • 1詹亚锋,曹志刚,马正新.直接扩频序列信号的参数估计[J].系统工程与电子技术,2004,26(9):1176-1178. 被引量:14
  • 2C A French and W A Gardener. Spread-spectrum despreading without the code [J]. IEEE Trans. Commun. , 1986,34 (4): 404 ~407.
  • 3H V Poor and S Verdu. Probability of error in MMSE multiuser detection[J]. IEEE Trans. Inform. Theory,1997,43(3) :858~871.
  • 4Lang Tong, Guanghan Xu, and Thomas Kailath. Blind identification and equalization based on second-order statistics: A time domain approach[J]. IEEE Trans.Inform. Theory, 1994,40(2):340~349.
  • 5Stoica P, Nehorai A, MUSIC. Maxium likelihood, and cramer-rao bound[J]. IEEE Trans. Acoust. , Speech,Signal Processing, 1989,37(5): 720~741.
  • 6Simon M, Omura J, Scholtz R, Levitt B. Spread Spectrum Communications [ M ]. New York : McGraw-Hill,lnc, 1994.
  • 7Gardner W A. Signal lnterception:a unifying theoretical framework for feature detection [ J ]. IEEE Trans. Commun,1988,36(8) :897 -906.
  • 8Gardner W A. Exploitation of spectral redundancy in cyclostationary signals[J]. IEEE Signal Processing Magazine,1991, (8) :14 -36.
  • 9Gardner W A. Spooner C M. Signal interception.performance advances of cyclic-feature detectors[J]. IEEE Trans Commun, 1992,40 ( 1 ) : 149 - 159.
  • 10Dandwate A V. Testing for presence of kth-order cyclostationarity[ A ]. IEEE Signal Processing Workshop on Higher-Order Statistics [ C ]. USA: IEEE Press,1993. 240 - 244.

共引文献72

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部