摘要
研究了变温低压 (真空 )渗碳技术的可行性和相关工艺。在自制的装置上进行了工艺试验 ,并对试验结果进行测试分析。试验结果证明变温低压渗碳不仅是可行的 。
The feasibility and relative process for altering temperature and low pressure carburizing were studied.Home made apparatus was used to choice the optimum process parameters,and analysis was made for result of test.Results showed that altering temperature and vaccuum caburizing was feasible and had advantages such as rapid speed and saving energy.
出处
《金属热处理》
CAS
CSCD
北大核心
2000年第5期25-26,共2页
Heat Treatment of Metals
基金
山西省自然科学基金资助项目
