期刊文献+

高Nb-X80管线钢奥氏体晶粒长大规律 被引量:11

Austenite grain growth behavior of high Nb-X80 pipeline steel
原文传递
导出
摘要 通过改变均热温度、保温时间,对高Nb-X80管线钢奥氏体晶粒长大规律进行了研究。结果表明,当保温温度高于1200℃时,奥氏体晶粒长大倾向显著增加,最佳保温温度范围为1150~1200℃。在1050~1200℃,高Nb-X80管线钢奥氏体晶粒长大规律为D1/0.1294-D01/0.1294=6.283×1022exp(-(426310)/(RT))t。 Abstract: By changing heating temperature and holding time, the austenite grain growth behavior of high Nb-X80 pipeline steel was studied. The results show that, when the holding temperature is higher than 1200 ℃, the austenite grain growth tendency increases significantly, the optimum holding temperature range is 1150-1200 ℃. Under the temperature range of 1050-1200 ℃, the austenite grain growth behavior ofhigh Nb-XSO pipeline steel can be described asD1/0.1294-Do^1/0.1294=6.283×10^22exp(-426310/RT)t.
出处 《金属热处理》 CAS CSCD 北大核心 2012年第9期64-66,共3页 Heat Treatment of Metals
基金 国家"973"计划(2012CB723905)
关键词 X80管线钢 奥氏体 晶粒长大 XSO pipeline steel austenite grain growth
  • 相关文献

参考文献10

  • 1Zhang J, Baker T N. Effect of equalization time on the anstenite grain size of simulated thin slab direct charged (TSDC) vanadium mieroalloyed steels [ J ]. ISIJ International, 2003, 43 ( 12 ) : 2015- 2022.
  • 2Illescas S, Fernandez J, Guilemany J M. Kinetics analysis of the austenite grain growth in HSLA steel with low carbon content [ J ]. Materials Letters, 2008, 62(30) : 3478-3480.
  • 3Joonoh M, Jongbong L, Changhee L. Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti- microalloyed steel [ J ]. Materials Science and Engineering A, 2007, 459(1/2) : 40-46.
  • 4Hong S G, Jun H J, Kang K B, et al. Evolution of precipitates in the Nb-Ti-V microalloyed HSLA steels during reheating [ J ]. Scripta Materialia, 2003, 48(8): 1201-1206.
  • 5Jha S C, Sanders J T H, Dayananda M A. Grain boundary precipitate free zones in A1-Li alloys [ J ]. Acta Metallurgica, 1987, 35 ( 2 ) : 473-482.
  • 6Maldonado R, Nembach E. The formation of precipitate free zones and the growth of grain boundary carbides in the nickel-base superalloy nimonic PE16[J]. Acta Materialia, 1997,45(1) : 213-224.
  • 7Jiang H, Faulkner R G. Modeling of grain boundary segregation, precipitation and precipitate-free zones of high strength aluminium alloys- I : the model[J]. Acta Materialia, 1996, 44(5) : 1857-1864.
  • 8Wang H R, Wang W. Coupled model for particle dissolution and coarsening in microalloyed steels [ J ]. Material Science and Technology, 2007, 23( 11 ) : 1305-1308.
  • 9Joonoh M, Changhee L, Sangho U, et al. Coarsening kinetics of TiN particle in a low alloyed steel in weld HAZ : considering critical particle size[J]. Acta Materialia, 2006, 54(4) : 1053-1061.
  • 10Joonoh M, Sanghoon K, Jongbong L, et al. Limiting austenite grain size of TiN-containing steel considering the critical particle size [ J ]. Scripta Materialia, 2007, 56(12): 1083-1086.

同被引文献104

引证文献11

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部