期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

直喷汽油机压电晶体控制外开轴针式喷油器的喷雾可视化研究 被引量：6

Visualization of the Spray Characteristics of an Outward-Opening Pintle-Type Injector Actuated by Piezo for DI Gasoline Engines
下载PDF
导出
摘要 对新型压电晶体控制的外开轴针式喷油器在不同边界条件下实现的圆锥状喷雾的基本特征,包括喷雾锥角、喷雾轴向贯穿距及每循环喷油量进行了分析与研究,并在此基础上提出了针对这种外开轴针式喷油器的喷雾轴向贯穿距经验公式.为了能够对喷雾的空间分布能力及油气混合特性进行定性分析,提出了喷雾体积放大倍率的概念.采用超高速摄影相机获得的可视化结果表明,这种喷油器形成的空心圆锥状喷雾实际上是由许多直径较小的"油线"组成的.油线结构的发现为进一步分析及研究其喷雾特性提供了参考和依据. Spray characteristics of a piezo outward-opening pintle-type injector, including spray angle, spray tip penetration and cycle fuel injection quantity, are investigated under different boundary condi- tions. Based on spray images, an empirical equation for spray axial tip penetration is obtained. Further- more, for qualitatively analyzing the characteristics of spray distribution and atomization, a concept named spray volume enhancement ratio,δSVER, is proposed based on the experimental results. The im- ages taken by ultra high-speed camera proves that the cone spray actually consists of hundreds of strings, instead of a continuous structure. This phenomenon provides evidence for further research on spray charac- teristics of this kind of injector.
作者 董全 隆武强 田江平 石間経章 川岛久宜 小林義幸
机构地区 大连理工大学内燃机研究所 群马大学大学院工学研究科
出处 《内燃机学报》 EI CAS CSCD 北大核心 2012年第5期415-422,共8页 Transactions of Csice
关键词 外开轴针式 可视化 喷雾体积放大倍率 油线 outward-opening pintle-type visualization spray volume enhancement ratio strings
分类号 TK423.8 [动力工程及工程热物理—动力机械及工程]
  • 相关文献

参考文献13

  • 1Zhao F, Lai M C, Harrington D L. Automotive spark- ignited direct-injection gasoline engines [J]. Progress in Energy and Combustion Science, 1999, 25 (5): 437- 562.
  • 2Kuwahara K, Ueda K, Ando H. Mixing control strat- egy for engine performance improvement in a gasoline direct injection engine [C]. SAE Paper 980158, 1998.
  • 3Nouri J M, Hamid M A, Yan Y, et al. Spray charac- terization of a piezo pintle-type injector for gasoline di- rect injection engines [C]//In Proceedings of the 3rd In- temational Conference on Optical and Laser Diagnostics, ICOLAD 2007, City University, London, 2007.
  • 4Arcoumanis C, Kamimoto T. Flow and combustion in reciprocating engines [M]. Berlin-Heidelberg: Springer Press, 2009: 137-171.
  • 5Luttermann C, M-ihrle W. BMW high precision fuel injection in conjunction with twin-turbo technology: A combination for maximum dynamic and high fuel effi- ciency[C]. SAE Paper 2007-01-1560, 2007.
  • 6Fischer J, Kem W, Umterweger G, et al. Methods for the development of the spray guided. BMW DI combus- tion system [C]//In Proceedings of the 7th International Symposium on Internal combustion diagnostics, AVL, Baden-Baden, Germany, 2006.
  • 7Martin D, Pischke P, Kneer R. Investigation of the influence of multiple gasoline direct injections on macro- scopic spray quantities at different boundary conditions by means of visualization [J]. Int J Engine Res, 2010, 11 (6) - 439-454.
  • 8Nouri J M, Hamid M A, Abo-Serie E, et al. Internal and near nozzle flow characteristics in an enlarged model of an outward opening pintle-type gasoline injector [C]. Proceedings of 3rd International Conference on Optical and Laser Diagnostics, ICOLAD 2007, City University, London, 2007.
  • 9Marchi A, Nouri J M, Arcoumanis C. Internal flow and spray characteristics of pintle-type outwards opening piezo injectors for gasoline direct-injection engines [C]. SAE Paper 2007-01-1406, 2007.
  • 10Skogsberg M, Dahlander P, Denbratt I. Spray shape and atomization quality of an outward-opening piezo gasoline DI injector [C]. SAE Paper 2007-01-1409, 2007.

二级参考文献5

  • 1Chaves H, Knapp M.Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles[C]. SAE Paper 950290,1995.
  • 2Roosen P, Unruh O, Behmann M.Untersuchung und Modellierung des Transienten Verhaltens von Kavitationserscheinungen bei ein-und Mehrkomponentigen Kraftstoffen in Schnell Durchstromten Düsen[C]. Report of the Institute for Technical Thermodynamics,RWTH Aac
  • 3Schmidt D P,Corradini M L.Analytical Prediction of the Exit Flow of Cavitating Orifices[J]. Atomization and Sprays, 1997,7(6):54-65.
  • 4Schmidt D P, Corradini M L,Rutland C J.A Two-dimensional Non-equilibrium Model of Flashing Nozzle Flow[C]. In 3rd ASME/JSME Joint Fluids Engineering Conference,1999.
  • 5玉木伸茂,林航空.喷油嘴喷孔空穴现象对液体喷束雾化的影响[J].国外内燃机车,1998(8):23-29. 被引量：15

共引文献37

同被引文献61

  • 1高祥,宋崇林,成存玉,郭振鹏,董素荣.乙醇/汽油混合燃料对电喷汽油机排放特性的影响[J].农业机械学报,2005,36(8):5-8. 被引量：6
  • 2刘福水,郝利君,Heitz Peter Berg.氢燃料内燃机技术现状与发展展望[J].汽车工程,2006,28(7):621-625. 被引量：31
  • 3Zhao F, Lai M C, Harrington D L. Automotive spark- ignited direct-injection gasoline engines [J]. Progress in Energy and Combustion Science, 1999, 25(5): 437- 562.
  • 4Kuwahara K, Ueda K, Ando H. Mixing control strat-egy for engine performance improvement in a gasoline direct injection engine [C]. SAE Paper 980158, 1998.
  • 5Arcoumanis C, Kamimoto T. Flow and combustion in reciprocating engines [M]. Berlin-Heidelberg: Springer Press, 2009: 137-171.
  • 6Skogsberg M, Dahlander P, Denbratt I. Spray shape and atomization quality of an outward-opening piezo gasoline DI injectorEC]. SAE Paper 2007-01-1409, 2007.
  • 7Sauter W, Pfeil J, Velji A, et al. Application of parti- cle image velocimetry for investigation of spray charac- teristics of an outward opening nozzle for gasoline direct injection [C]. SAE Paper 2006-01-3377, 2006.
  • 8Kuwahara K, Ando H. Diagnostics of in-cylinder flow, mixing and combustion in gasoline engines [J]. Meas Sci Technol, 2000, 11 (6) : 95-111.
  • 9Wu Z, Zhu Z, Huang Z. An experimental study on the spray structure of oxygenated fuel using laser-based visu- alization and particle image velocimetry[J]. Fuel, 2006, 85(10) : 1458-1464.
  • 10Sazhin S S, Kaplanski F, Feng G, et al. A fuel spray induced vortex ring [J]. Fuel, 2001, 80(13): 1871- 1883.

引证文献6

二级引证文献14

内燃机学报
2012年 第5期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部